溫馨提示×
您好，登錄后才能下訂單哦！
點擊 登錄注冊 即表示同意《億速云用戶服務條款》
您好，登錄后才能下訂單哦！
本文實例為大家分享了Qt圓盤進度條的具體代碼，供大家參考，具體內容如下
自定義控件二：圓盤進度條
上效果圖：
主要思路：使用qpainter根據圖形需求 畫圓和圓弧，畫指針（多邊形，指定坐標即可），根據具體的value值旋轉坐標系，使指針達到旋轉效果，旋轉度數是根據value值，總共360度，占比求得。最中間需要畫文字上去，每次更新value時調用update（）方法，重繪界面。
主要代碼：CMPassrate1.cpp
void CMPassrate1::paintEvent(QPaintEvent *event){
int width = this->width();
int height = this->height();
int side = qMin(width, height);
QPainter painter(this);
painter.setRenderHints(QPainter::Antialiasing | QPainter::TextAntialiasing);
painter.translate(width / 2, height / 2);
painter.scale(side / 200.0, side / 200.0);
//繪制外圓
paintSide(&painter);
paintOutE(&painter);
paintLine(&painter);//繪制刻度線
paintInE(&painter);
paintPoint(&painter);//繪制指針
paintTextE(&painter);//繪制文字所在的圓
paintText(&painter);//繪制文字
paintValue(&painter);//繪制value對應的填充角度
}
void CMPassrate1::paintSide(QPainter *painter){
int radis = outRadis;
QRect rect(-radis,-radis,radis*2,radis*2);
painter->save();
painter->setBrush(QBrush(QColor("#505050")));
painter->setPen(Qt::NoPen);
painter->drawEllipse(rect);
painter->restore();
}
void CMPassrate1::paintOutE(QPainter *painter){
int radis = outRadis-side;
QRect rect(-radis,-radis,radis*2,radis*2);
painter->save();
painter->setBrush(QBrush(QColor("#868686")));
painter->setPen(Qt::NoPen);
painter->drawEllipse(rect);
painter->restore();
}
void CMPassrate1::paintLine(QPainter *painter){
int lineStart = outRadis-3;
painter->save();
painter->setPen(QColor("#868686"));
int range = 360/12;
for(int i = 0;i<12;i++){
painter->rotate(range);
painter->drawLine(QPoint(lineStart,0),QPoint(outRadis,0));
}
painter->restore();
}
void CMPassrate1::paintInE(QPainter *painter){
int radis = inRadis;
QRect rect(-radis,-radis,radis*2,radis*2);
painter->save();
painter->setBrush(QBrush(QColor("#646464")));
painter->setPen(Qt::NoPen);
painter->drawEllipse(rect);
painter->restore();
}
void CMPassrate1::paintTextE(QPainter *painter){
int radis = 23;
QRect rect(-radis,-radis,radis*2,radis*2);
painter->save();
painter->setBrush(QBrush(QColor("#FFFFFF")));
painter->setPen(Qt::NoPen);
painter->drawEllipse(rect);
painter->restore();
}
void CMPassrate1::paintPoint(QPainter *painter){
painter->save();
const QPoint points[3] = {
QPoint(10,0),
QPoint(-10,0),
QPoint(0,inRadis-5)
};
int range = ((double)value/100)*360;
painter->rotate(range);
painter->setPen(Qt::NoPen);
painter->setBrush(QBrush(QColor("#66CFFF")));
painter->drawConvexPolygon(points,3);
painter->restore();
}
void CMPassrate1::paintText(QPainter *painter){
int radis = 23;
QRect rect(-radis,-radis,radis*2,radis*2);
painter->save();
painter->setBrush(QBrush(QColor("#000000")));
painter->setPen(QPen(QColor("#000000")));
QFont font = painter->font();
font.setPixelSize(20);
painter->setFont(font);
painter->drawText(rect,Qt::AlignCenter,QString("%1%").arg(QString::number(value)));
painter->restore();
}
void CMPassrate1::paintValue(QPainter *painter){
int oRandis = outRadis-side;
qDebug()<<"value::"<<value;
int rangle = ((double)value/100)*360;
QRectF rect(-oRandis, -oRandis, oRandis << 1, oRandis << 1);
QPainterPath path;
qDebug()<<"rangle:"<<rangle<<" start:"<<270-rangle;
path.arcTo(rect, 270-rangle, rangle);
// QRectF(-120, -120, 240, 240)
QPainterPath subPath;
subPath.addEllipse(rect.adjusted((oRandis-inRadis),(oRandis-inRadis),-(oRandis-inRadis),-(oRandis-inRadis)));
// path為扇形 subPath為橢圓
path -= subPath;
painter->save();
painter->setBrush(valueColor);
painter->setPen(Qt::NoPen);
painter->drawPath(path);
painter->restore();
}
以上就是本文的全部內容，希望對大家的學習有所幫助，也希望大家多多支持億速云。
免責聲明：本站發布的內容（圖片、視頻和文字）以原創、轉載和分享為主，文章觀點不代表本網站立場，如果涉及侵權請聯系站長郵箱：is@yisu.com進行舉報，并提供相關證據，一經查實，將立刻刪除涉嫌侵權內容。
