Oracle中Analyze命令的詳細介紹

這篇文章主要講解了“Oracle中Analyze命令的詳細介紹”，文中的講解內容簡單清晰，易于學習與理解，下面請大家跟著小編的思路慢慢深入，一起來研究和學習“Oracle中Analyze命令的詳細介紹”吧！

使用DBMS_STATS 收集統計信息參考：

Oracle Statistic 統計信息 小結

http://blog.csdn.net/tianlesoftware/article/details/4668723

Oracle 判斷 并 手動收集 統計信息 腳本

http://blog.csdn.net/tianlesoftware/article/details/6445868

一.Purpose

Use the ANALYZE statement tocollect statistics, for example, to:

--使用analyze命令可以收集統計信息，如：

（1）Collect ordelete statistics about an index or index partition, table or table partition,index-organized table, cluster, or scalar object attribute.

--收集或刪除對象的統計信息

（2）Validate thestructure of an index or index partition, table or table partition, index-organizedtable, cluster, or object reference (REF).

--驗證對象的結構

（3）Identifymigrated and chained rows of a table or cluster.

--確定table 或cluster的migrated 和chained rows。

For thecollection of most statistics, use the DBMS_STATS package, which letsyou collect statistics in parallel, collect global statistics for partitionedobjects, and fine tune your statistics collection in other ways.

--在大多數情況下，使用DBMS_STATS 包來收集統計信息。

Usethe ANALYZE statement (rather than DBMS_STATS) for statisticscollection not related to the cost-based optimizer:

--在如下兩種情況下，使用analyze 命令要比dbms_stats 包好：

（1）To usethe VALIDATE or LIST CHAINED ROWS clauses

（2）To collectinformation on freelist blocks

二.Prerequisites

The schemaobject to be analyzed must be local, and it must be in your own schema or youmust have the ANALYZE ANY system privilege.

If you want tolist chained rows of a table or cluster into a list table, then the list tablemust be in your own schema, or you must have INSERT privilege on thelist table, or you must have INSERT ANY TABLE systemprivilege.

If you want tovalidate a partitioned table, then you must have the INSERT objectprivilege on the table into which you list analyzed rowids, or you must havethe INSERT ANY TABLE system privilege.

三. Syntax

詳細語法如下：

   ANALYZE TABLE tablenameCOMPUTE|ESTIMATE|DELETE STATISTICS ptnOption options

   ANALYZE INDEX indexnameCOMPUTE|ESTIMATE|DELETE STATISTICS ptnOption options

   ANALYZE CLUSTER clusternameCOMPUTE|ESTIMATE|DELETE STATISTICS options

ptnOption

   PARTITION (partion)

   SUBPARTITION (subpartition)

options

   VALIDATE STRUCTURE [CASCADE][INTO tablename]

   LIST CHAINED ROWS [INTOtablename]

   COMPUTE|ESTIMATE STATISTICSFOR TABLE

   COMPUTE|ESTIMATE STATISTICSFOR ALL COLUMNS

   COMPUTE|ESTIMATE STATISTICSFOR ALL INDEXED COLUMNS

   COMPUTE|ESTIMATE STATISTICSFOR COLUMNS [SIZE int] column [SIZE int]

   When Estimating statistics youcan optionally

    specify

    ... ESTIMATE STATISTICSSAMPLE n ROWS

    ... ESTIMATE STATISTICSSAMPLE n PERCENT

四. Semantics

4.1 schema

Specify theschema containing the table, index, or cluster. If you omit schema, thenOracle Database assumes the table, index, or cluster is in your own schema.

4.2 TABLE table

Specify a tableto be analyzed. When you analyze a table, the database collects statisticsabout expressions occurring in any function-based indexes as well. Therefore,be sure to create function-based indexes on the table before analyzing thetable. Refer to CREATEINDEX for more information about function-based indexes.

--當使用analyze 收集表的統計信息時，也會自動收集函數索引的信息。

When analyzing atable, the database skips all domain indexesmarked LOADING or FAILED.

--在收集表的統計信息時，會跳過標記為Loading 或Failed 的索引。

For anindex-organized table, the database also analyzes any mapping table andcalculates its PCT_ACCESSS_DIRECT statistics. These statisticsestimate the accuracy of guess data block addresses stored as part of the localrowids in the mapping table.

Oracle Databasecollects the following statistics for a table. Statistics marked with anasterisk are always computed exactly. Table statistics, including the status ofdomain indexes, appear in the data dictionary views USER_TABLES, ALL_TABLES,and DBA_TABLES in the columns shown in parentheses.

--Oracle analyze 收集表的如下統計信息，其中加星號的會準確收集，收集的信息放在user_tables,all_tables 和 dba_tables 里的對應字段，下面的括號內是對應的字段：

 （1）Number of rows (NUM_ROWS)

（2）* Number of data blocks below thehigh water mark—the number of data blocks that have been formatted to receivedata, regardless whether they currently contain data or are empty (BLOCKS)

（3）* Number of data blocks allocatedto the table that have never been used (EMPTY_BLOCKS)

（4）Average available free space in eachdata block in bytes (AVG_SPACE)

（5）Number of chained rows(CHAIN_COUNT)

（6）Average row length, including therow overhead, in bytes (AVG_ROW_LEN)

4.2.1 Restrictions on AnalyzingTables 

Analyzing tables is subject to thefollowing restrictions:

--analyze table 有如下限制：

（1）You cannotuse ANALYZE to collect statistics on data dictionary tables.

     --不能收集datadictionary tables

（2）You cannotuse ANALYZE to collect statistics on an external table. Instead, youmust use the DBMS_STATS package.

--不能收集external table， 如果要收集外部表的統計信息，需要使用DBMS_STATS包.

（3）You cannotuse ANALYZE to collect default statistics on a temporary table.However, if you have already created an association between one or more columnsof a temporary table and a user-defined statistics type, then you canuse ANALYZE to collect the user-defined statistics on the temporarytable.

     --不能收集臨時表的defaultstatistics.

（4）You cannotcompute or estimate statistics for the following column types:

--不用計算或者估算如下類型列的統計信息：

 REF columntypes, varrays, nested tables, LOB column types (LOB column types are notanalyzed, they are skipped), LONG column types, or object types.However, if a statistics type is associated with such a column, then OracleDatabase collects user-defined statistics.

4.2.2 partition_extension_clause

Specify thepartition or subpartition, or the partition or subpartition value, on which youwant statistics to be gathered. You cannot use this clause when analyzingclusters.

--可以在收集統計信息時指定分區，但是當是cluster 時，則不能收集。

If youspecify PARTITION and table is composite-partitioned, thenOracle Database analyzes all the subpartitions within the specified partition.

--如果指定的分區是組合分區，那么會收集所有的子分區。

4.3 INDEX index

Specify an indexto be analyzed.

Oracle Databasecollects the following statistics for an index. Statistics marked with anasterisk are always computed exactly. For conventional indexes, when youcompute or estimate statistics, the statistics appear in the data dictionaryviews USER_INDEXES, ALL_INDEXES, and DBA_INDEXES in thecolumns shown in parentheses.

--Analyze 收集索引的如下統計信息，加星號的準確收集。 對于conventionalindex，收集的統計信息可以通過user_indexes,all_indexes或者 dba_indexes 來查看，具體對應的字段查看括號里的內容。

（1）* Depth of the index from its rootblock to its leaf blocks (BLEVEL)

（2）Number of leaf blocks (LEAF_BLOCKS)

（3）Number of distinct index values(DISTINCT_KEYS)

（4）Average number of leaf blocks foreach index value (AVG_LEAF_BLOCKS_PER_KEY)

（5）Average number of data blocks foreach index value (for an index on a table) (AVG_DATA_BLOCKS_PER_KEY)

（6）Clustering factor (how well orderedthe rows are about the indexed values) (CLUSTERING_FACTOR)

For domainindexes, this statement invokes the user-defined statistics collection functionspecified in the statistics type associated with the index (see ASSOCIATESTATISTICS). If no statistics type is associated with the domain index,then the statistics type associated with its indextype is used. If nostatistics type exists for either the index or its indextype, then nouser-defined statistics are collected. User-defined index statistics appear inthe STATISTICS column of the data dictionaryviews USER_USTATS, ALL_USTATS, and DBA_USTATS.

--對于domain indexes，收集user-defined indexstatistics 信息，可以通過user_ustats,all_ustats 和dba_ustats 來查看。

官網對domain index 的解釋：

A domain index is an index designed for a specializeddomain, such as spatial or image processing. Users can build a domain index ofa given type after the designer creates the indextype.The behavior. of domain indexes is specific to an industry, a business function,or some other special purpose; you must specify it during cartridgedevelopment.

http://docs.oracle.com/cd/E11882_01/appdev.112/e10765/dom_idx.htm#ADDCI4409

Restriction on AnalyzingIndexes 

You cannotanalyze a domain index that is marked IN_PROGRESS or FAILED.

            --不能收集被標記為in_progress 和 failed的domainindex 統計信息。

Note:

When you analyzean index from which a substantial number of rows has been deleted, OracleDatabase sometimes executes a COMPUTE statistics operation (which canentail a full table scan) even if you request an ESTIMATE statisticsoperation. Such an operation can be quite time consuming.

--當我們收集統計信息時，如果表或索引上有大量的數據被刪除，那么如果采用compute或者 estimage 來收集，可以會進行full table scan，因此會使用很多的時間。示例：

 SYS@anqing1(rac1)> analyze table ttestimate statistics;

Table analyzed.

SYS@anqing1(rac1)> analyze table ttcompute statistics;

Table analyzed.

SYS@anqing1(rac1)> analyze indexidx_tt_id compute statistics;

Index analyzed.

SYS@anqing1(rac1)> analyze indexidx_tt_id estimate statistics;

Index analyzed.

4.4 CLUSTER cluster

Specify acluster to be analyzed. When you collect statistics for a cluster, OracleDatabase also automatically collects the statistics for all the tables in thecluster and all their indexes, including the cluster index.

--當收集cluster 的信息時，DB 會自動收集cluster所有表和索引的統計信息，包括cluster index。

For both indexedand hash clusters, the database collects the average number of data blockstaken up by a single cluster key (AVG_BLOCKS_PER_KEY). These statistics appearin the data dictionary viewsALL_CLUSTERS, USER_CLUSTERS,and DBA_CLUSTERS.

4.5 validation_clauses

The validationclauses let you validate REF values and the structure of the analyzedobject.

4.5.1VALIDATE REF UPDATE Clause

Specify VALIDATE REF UPDATE tovalidate the REF values in the specified table, check the rowidportion in each REF, compare it with the true rowid, and correct it, ifnecessary. You can use this clause only when analyzing a table.

            --指定validate ref update來驗證ref的值，檢查時會那每個ref 的rowid 于表真實的rowid 進行比較，如果不一致，就修改ref 的值。

If the owner ofthe table does not have SELECT object privilege on the referencedobjects, then Oracle Database will consider them invalid and set them to null.Subsequently these REF values will not be available in a query, evenif it is issued by a user with appropriate privileges on the objects.

            --如果表的用戶沒有selectreferenced 對象的權限，那么DB 會認為他們是無效，并設置為空，因為在之后的查詢中，ref 值就不可用，即使用戶有權限的用戶重新發布了ref values。

4.5.2 SET DANGLING TO NULL  

SET DANGLING TO NULL setsto null any REF values (whether or not scoped) in the specified tablethat are found to point to an invalid or nonexistent object.

4.5.3 VALIDATE STRUCTURE

Analyze 的語法如下：

ANALYZE INDEX <index_name>

[PARTITION <partition_name>]

[SUBPARTITION <subpartition_name>]

VALIDATE STRUCTURE CASCADE

INTO <table_name> <OFFLINE |ONLINE>

select * from index_stats;

ANALYZE TABLE <table_name>

[PARTITION <partition_name>]

[SUBPARTITION <subpartition_name>]

VALIDATE STRUCTURE CASCADE

[INTO <table_name>] <OFFLINE |ONLINE>

ANALYZE CLUSTER <cluster_name>VALIDATE STRUCTURE CASCADE

INTO <table_name> <OFFLINE |ONLINE>

Specify VALIDATE STRUCTURE tovalidate the structure of the analyzed object. The statistics collected by thisclause are not used by the Oracle Database optimizer.

（1）For a table,Oracle Database verifies the integrity of each of the data blocks and rows. Foran index-organized table, the database also generates compression statistics(optimal prefix compression count) for the primary key index on the table.

--對于table，DB 驗證每個datablock 和rows 的完整性。 對于index-organized table，db 也生成主鍵索引的compressionstatistics。

（2）For acluster, Oracle Database automatically validates the structure of the clustertables.

--對于cluster，db 自動驗證clustertable 的structure。

（3）For apartitioned table, Oracle Database also verifies that each row belongs to thecorrect partition. If a row does not collate correctly, then its rowid isinserted into the INVALID_ROWS table.

--對于分區表，db 驗證每個row 是否屬于正確的分區，如果row 沒有效驗正確，那么這個rowid 會插入invalid_rows 表。

（4）For atemporary table, Oracle Database validates the structure of the table and itsindexes during the current session.

--對于臨時表，db 會驗證其structure 和 current session 期間的索引。

（5）For an index,Oracle Database verifies the integrity of each data block in the index andchecks for block corruption. This clause does not confirm that each row in thetable has an index entry or that each index entry points to a row in the table.You can perform. these operations by validating the structure of the table withthe CASCADE clause.

--對于索引，db 驗證每個索引block 的完整性和block 是否損壞。 這個命令不會確實每個表的row 是否和索引的row 匹配。

Oracle Databasealso computes compression statistics (optimal prefix compression count) for allnormal indexes.

Oracle Databasestores statistics about the index in the data dictionaryviews INDEX_STATS and INDEX_HISTOGRAM.

            --Oracle 存儲索引相關的statistics 在Index_stats和 index_histogram里。

If OracleDatabase encounters corruption in the structure of the object, then an errormessage is returned. In this case, drop and re-create the object.

--如果DB 在對象的structure里遇到corruption，那么會返回error，這種情況下需要drop和re-create 對象。

4.5.3.1 INTO 

The INTO clauseof VALIDATE STRUCTURE is valid only for partitioned tables.Specify a table into which Oracle Database lists the rowids of the partitionswhose rows do not collate correctly. If you omit schema, then the databaseassumes the list is in your own schema. If you omit this clause altogether,then the database assumes that the table is named INVALID_ROWS. The SQLscript. used to create this table is UTLVALID.SQL.

--into clause 僅對分區表有效。指定一個表來存放效驗不正確的數據，如果忽略用戶，則認為是的當前的用戶，如果忽略表，則默認會認為表示INVALID_ROWS。創建這個表的sql 腳本是： $ORACLE_HOME/rdbms/admin/utlvalid.sql

[oracle@rac1 admin]$ cat utlvalid.sql

create tableINVALID_ROWS (

  owner_name         varchar2(30),

  table_name         varchar2(30),

  partition_name     varchar2(30),

  subpartition_name  varchar2(30),

  head_rowid         rowid,

  analyze_timestamp  date

);

4.5.3.2 CASCADE 

Specify CASCADE ifyou want Oracle Database to validate the structure of the indexes associatedwith the table or cluster. If you use this clause when validating a table, thenthe database also validates the indexes defined on the table. If you use thisclause when validating a cluster, then the database also validates all thecluster tables indexes, including the cluster index.

--當指定cascade 后，DB 在驗證對象時也會關聯其他的相關的對象，如索引關聯表，表就關聯索引。 如果是驗證cluster，就關聯cluster tables 和indexes，包含cluster index。

Bydefault, CASCADE performs a COMPLETE validation, which canbe resource intensive. Specify FAST if you want the database to checkfor the existence of corruptions without reporting details about thecorruption. If the FAST check finds a corruption, you can then usethe CASCADE option without the FAST clause to locate andlearn details about it.

--默認情況下，cascade 執行的是complete validation，如果我們指定FAST，那么只檢查已經存在的corruptions，并且不報告corruption的詳細信息。 如果FAST check 發現了corruption，那么可以使用cascade查看詳細信息。

If you use thisclause to validate an enabled (but previously disabled) function-based index,then validation errors may result. In this case, you must rebuild the index.

4.5.3.3 ONLINE | OFFLINE 

Specify ONLINE toenable Oracle Database to run the validation while DML operations are ongoingwithin the object. The database reduces the amount of validation performed toallow for concurrency.

--指定online 后可以在DML時進行validate操作，但是這樣會降低validation 的性能。

Note:

When youvalidate the structure of an object ONLINE, Oracle Database does notcollect any statistics, as it does when you validate the structure of theobject OFFLINE.

            --這里要注意，在前面我們提到當進行validate 時會將收集的信息存放到Index_stats 和index_histogram里，如果我們指定ONLINE，則不會將statistics 信息寫入index_stats視圖。

Specify OFFLINE,to maximize the amount of validation performed. This settingprevents INSERT, UPDATE, and DELETE statements fromconcurrently accessing the object during validation but allows queries. This isthe default.

            --OFFLINE 是默認值，這種也是性能最好的。 但是offline在驗證期間會阻止對象的insert，update 和 delete操作。

所以對于在線業務可以考慮使用validatestructure online在線驗證方法，但是validate strucutre online也有它的缺點，那就是online下結構驗證信息不會寫入index_stats 和 index_histogram 里。

4.5.3.4 Restriction on ONLINE

 You cannotspecify ONLINE when analyzing a cluster.

--online 不能使用于cluster 對象。

4.6 LIST CHAINED ROWS

有關chained rows的詳細內容，下節在說明，先看該命令語法：

ANALYZE TABLE <table_name> LISTCHAINED ROWS

INTO <table_name>;

ANALYZE CLUSTER <cluster_name> LISTCHAINED ROWS INTO <table_name>;

LIST CHAINED ROWS letsyou identify migrated and chained rows of the analyzed table or cluster. Youcannot use this clause when analyzing an index.

--不能在索引上使用。

Inthe INTO clause, specify a table into which Oracle Database lists themigrated and chained rows. If you omit schema, then the database assumesthe chained-rows table is in your own schema. If you omit this clausealtogether, then the database assumes that the table isnamed CHAINED_ROWS. The chained-rows table must be on your local database.

執行該命令時通過into 來指定存放有鏈化數據的表，如果沒有指定表，db 會假設表名為CHAINED_ROWS。

You can createthe CHAINED_ROWS table using one of these scripts:

--默認情況下沒有創建這個表，我們要先創建這個表之后才能存放數據：

（1）UTLCHAIN.SQL usesphysical rowids. Therefore it can accommodate rows from conventional tables butnot from index-organized tables. (See the Note that follows.)

（2）UTLCHN1.SQL usesuniversal rowids, so it can accommodate rows from both conventional andindex-organized tables.

--可以使用上面的任一腳本來創建chained_rows 表。

If you create your own chained-rows table, then it must follow the format prescribed by oneof these two scripts.

If you areanalyzing index-organized tables based on primary keys (rather than universalrowids), then you must create a separate chained-rows table for eachindex-organized table to accommodate its primary-key storage.

Use the SQLscripts DBMSIOTC.SQL and PRVTIOTC.PLB to definethe BUILD_CHAIN_ROWS_TABLE procedure, and then execute this procedureto create an IOT_CHAINED_ROWS table for each such index-organizedtable.

4.7 DELETE STATISTICS

Specify DELETE STATISTICS todelete any statistics about the analyzed object that are currently stored inthe data dictionary. Use this statement when you no longer want Oracle Databaseto use the statistics.

When you usethis clause on a table, the database also automatically removes statistics forall the indexes defined on the table. When you use this clause on a cluster,the database also automatically removes statistics for all the cluster tablesand all their indexes, including the cluster index.

--當我們delete 表的statistics 時，DB 會自動remove表上所有索引statistics。

Specify SYSTEM ifyou want Oracle Database to delete only system (not user-defined) statistics.If you omit SYSTEM, and if user-defined column or index statistics werecollected for an object, then the database also removes the user-definedstatistics by invoking the statistics deletion function specified in the statisticstype that was used to collect the statistics.

五．Chained Rows相關說明

            每個Block的大小都是有限的，當單個數據塊沒有足夠的空間來保存新建的一行記錄或者更新的某行記錄時，有兩種解決方法：rowchaining和rowmigration。

Row chaining 就是我們說的chained rows，即鏈化現象。

在我之前的blog：

Oracle 數據塊 Block 說明

http://blog.csdn.net/tianlesoftware/article/details/6414765

中的9.5 小節有說明： Chained and MigratedRows

Row chaining：

Row migration：

When a row ischained or migrated, the I/O needed to retrieve the data increases. Thissituation results because Oracle Database must scan multiple blocks to retrievethe information for the row.

         當產生大量的chained 或者 migrated 時，對會對I/O 產生影響。訪問這些數據的速度就會開始變慢，因為額外的i/o以及與i/o相關的閂定都會增加訪問時間，緩沖區緩存的效率開始下降，因為需要緩存兩個塊，而如果沒有行遷移只需要緩存一個塊。另外表的大小和復雜性都有所增加。

通過調整PCTFREE參數，可以有效避免鏈化現象。根據段空間管理方法的不同，相關的參數也不一樣，默認表空間使用  Locallymanaged tablespaces ，其又分utomatic segment space management (ASSM) 和manual segment space management(MSSM). 這部分內容參考：

Oracle 自動段空間管理(ASSM:autosegment space management)

http://blog.csdn.net/tianlesoftware/article/details/4958989

默認情況下行遷移是禁止的，可以通過如下SQL 驗證：

SYS@anqing1(rac1)> select d.row_movement from  dba_tables d where table_name='TT';

ROW_MOVE

--------

DISABLED

啟用行遷移：

SQL>alter table table_name enable row movement;

必須在啟用行遷移的情況下才能使用Shrink 和FlashbackTable，這部分具體參考：

Oracle 10g Shrink Table 詳解

http://blog.csdn.net/tianlesoftware/article/details/4764254

Oracle Flashback 技術 總結

http://blog.csdn.net/tianlesoftware/article/details/4677378

既然chained row 對性能影響很大，我們就需要監控它。這個就是我們的analyze 的作用所在。 但是收集到有chaining的row 需要保存到一個表里。 等我們analyze 完之后查看這個表就知道有多少chaining的數據了。

         而且在我們執行analyze 命令之前，必須先創建這個表，否則就會報錯。我們可以使用 $ORACLE_HOME/rdbms/admin/utlchain.sql 來創建這個表：

[root@rac1 ~]# cd $ORACLE_HOME/rdbms/admin

[root@rac1 admin]# cat utlchain.sql

create table CHAINED_ROWS (

 owner_name         varchar2(30),

 table_name         varchar2(30),

 cluster_name       varchar2(30),

 partition_name     varchar2(30),

 subpartition_name  varchar2(30),

 head_rowid         rowid,

 analyze_timestamp  date

);

創建完了就可以執行analyze命令：

ANALYZE TABLE <table_name> LISTCHAINED ROWS

INTO <table_name>;

ANALYZE CLUSTER <cluster_name> LISTCHAINED ROWS INTO <table_name>;

六. 示例

6.1 驗證Chained row

--沒有創建chained_rows表，這個是默認的表名：

SYS@anqing1(rac1)> select * from CHAINED_ROWS;

select * from CHAINED_ROWS

              *

ERROR at line 1:

ORA-00942: table or view does not exist

--在沒有創建chained_row表的情況下，執行analyze 失敗：

SYS@anqing1(rac1)> Analyze table tt list chained rows;

Analyze table tt list chained rows

*

ERROR at line 1:

ORA-01495: specified chain row table notfound

--創建表，在執行Analyze命令：

SYS@anqing1(rac1)>@?/rdbms/admin/utlchain.sql

SYS@anqing1(rac1)> Analyze table tt listchained rows;

Table analyzed.

--然后查詢chained_row表：

SYS@anqing1(rac1)> select * fromCHAINED_ROWS;

no rows selected

--我這里是測試表，沒有任何數據。官網的一個測試數據如下：

SELECT owner_name, table_name, head_rowid,analyze_timestamp

   FROM chained_rows

   ORDER BY owner_name, table_name, head_rowid, analyze_timestamp;

OWNER_NAME TABLE_NAME  HEAD_ROWID         ANALYZE_TIMESTAMP

---------- ----------  -----------------------------------

OE         ORDERS      AAAAZzAABAAABrXAAA25-SEP-2000

6.2 驗證 structure

對于普通表直接執行命令即可：

SYS@anqing1(rac1)> analyze table ttvalidate structure;

Table analyzed.

--指定cascade和 online：

SYS@anqing1(rac1)> analyze table ttvalidate structure cascade online;

Table analyzed.

--對于分區表， db 驗證每個row 是否屬于正確的分區，如果row 沒有效驗正確，那么這個rowid 會插入invalid_rows 表。

--默認情況下invalid_rows表也沒有創建，其創建腳本是：

$ORACLE_HOME/rdbms/admin/utlvalid.sql

有關分區表參考：

Oracle 分區表 總結

http://blog.csdn.net/tianlesoftware/article/details/4717318

我們創建了一個分區表pt。

SYS@anqing1(rac1)> analyze table ptvalidate structure;

analyze table pt validate structure

*

ERROR at line 1:

ORA-14508: specified VALIDATE INTO tablenot found

--對于分區表的驗證就必須指定into 和invalid_rows.

SYS@anqing1(rac1)>@?/rdbms/admin/utlvalid.sql

SYS@anqing1(rac1)> analyze table ptvalidate structure into invalid_rows;

Table analyzed.

SYS@anqing1(rac1)> analyze table ptvalidate structure cascade online into invalid_rows;

Table analyzed.

--analyze 完成之后查看invalid_rows表即可：

SYS@anqing1(rac1)> select * frominvalid_rows;

no rows selected

6.3 刪除統計信息

SYS@anqing1(rac1)> analyze table ttdelete statistics;

Table analyzed.

--該命令會刪除表和其所有索引的statistics。

小結：

從Oracle 8i以后analyze具備”validate”驗證功能，并且和DBMS_STATS包在功能上進行了劃分，analyze 主要負責驗證表和索引的結構以及鏈式行(chained and migrated rows)信息，DBMS_STATS包主要負責統計信息的管理。

          在以上的說明和測試這塊也是花了很多的篇幅來說明analyze 在validate 和 list chained rows上的用法。

在開篇提到在如下兩種情況下Analyze的效果要比DBMS_STATS包好。

（1）To usethe VALIDATE or LIST CHAINED ROWS clauses

（2）To collectinformation on freelist blocks

感謝各位的閱讀，以上就是“Oracle中Analyze命令的詳細介紹”的內容了，經過本文的學習后，相信大家對Oracle中Analyze命令的詳細介紹這一問題有了更深刻的體會，具體使用情況還需要大家實踐驗證。這里是億速云，小編將為大家推送更多相關知識點的文章，歡迎關注！