溫馨提示×
您好，登錄后才能下訂單哦！
點擊 登錄注冊 即表示同意《億速云用戶服務條款》
您好，登錄后才能下訂單哦！
本篇內容主要講解“RAC11G怎么添加節點”，感興趣的朋友不妨來看看。本文介紹的方法操作簡單快捷，實用性強。下面就讓小編來帶大家學習“RAC11G怎么添加節點”吧!
1.
|
[grid@rac1 ~]$ cluvfy stage -pre nodeadd -n rac3 -fixup -verbose Performing pre-checks for node addition Checking node reachability... Check: Node reachability from node "rac1" Destination Node Reachable? ------------------------------------ ------------------------ rac3 yes Result: Node reachability check passed from node "rac1" Checking user equivalence... Check: User equivalence for user "grid" Node Name Status ------------------------------------ ------------------------ rac3 passed Result: User equivalence check passed for user "grid" Checking node connectivity... Checking hosts config file... Node Name Status ------------------------------------ ------------------------ rac1 passed rac2 passed rac3 passed Verification of the hosts config file successful Interface information for node "rac1" Name IP Address Subnet Gateway Def. Gateway HW Address MTU ------ --------------- --------------- --------------- --------------- ----------------- ------ eth0 10.10.100.8 10.10.100.0 0.0.0.0 10.10.100.8 08:00:27:4C:F3:6B 1500 eth0 169.254.124.110 169.254.0.0 0.0.0.0 10.10.100.8 08:00:27:4C:F3:6B 1500 eth2 192.168.56.101 192.168.56.0 0.0.0.0 10.10.100.8 08:00:27:03:7F:93 1500 eth2 192.168.56.103 192.168.56.0 0.0.0.0 10.10.100.8 08:00:27:03:7F:93 1500 Interface information for node "rac2" Name IP Address Subnet Gateway Def. Gateway HW Address MTU ------ --------------- --------------- --------------- --------------- ----------------- ------ eth0 10.10.100.18 10.10.100.0 0.0.0.0 10.10.100.18 08:00:27:5A:38:E5 1500 eth0 169.254.136.19 169.254.0.0 0.0.0.0 10.10.100.18 08:00:27:5A:38:E5 1500 eth2 192.168.56.102 192.168.56.0 0.0.0.0 10.10.100.18 08:00:27:49:3B:EA 1500 eth2 192.168.56.108 192.168.56.0 0.0.0.0 10.10.100.18 08:00:27:49:3B:EA 1500 eth2 192.168.56.104 192.168.56.0 0.0.0.0 10.10.100.18 08:00:27:49:3B:EA 1500 Interface information for node "rac3" Name IP Address Subnet Gateway Def. Gateway HW Address MTU ------ --------------- --------------- --------------- --------------- ----------------- ------ eth0 10.10.100.28 10.10.100.0 0.0.0.0 10.10.100.28 08:00:27:CD:CF:BA 1500 eth2 192.168.56.105 192.168.56.0 0.0.0.0 10.10.100.28 08:00:27:CD:42:B4 1500 Check: Node connectivity for interface "eth2" Source Destination Connected? ------------------------------ ------------------------------ ---------------- rac1[192.168.56.101] rac1[192.168.56.103] yes rac1[192.168.56.101] rac2[192.168.56.102] yes rac1[192.168.56.101] rac2[192.168.56.108] yes rac1[192.168.56.101] rac2[192.168.56.104] yes rac1[192.168.56.101] rac3[192.168.56.105] yes rac1[192.168.56.103] rac2[192.168.56.102] yes rac1[192.168.56.103] rac2[192.168.56.108] yes rac1[192.168.56.103] rac2[192.168.56.104] yes rac1[192.168.56.103] rac3[192.168.56.105] yes rac2[192.168.56.102] rac2[192.168.56.108] yes rac2[192.168.56.102] rac2[192.168.56.104] yes rac2[192.168.56.102] rac3[192.168.56.105] yes rac2[192.168.56.108] rac2[192.168.56.104] yes rac2[192.168.56.108] rac3[192.168.56.105] yes rac2[192.168.56.104] rac3[192.168.56.105] yes Result: Node connectivity passed for interface "eth2" Check: TCP connectivity of subnet "192.168.56.0" Source Destination Connected? ------------------------------ ------------------------------ ---------------- rac1:192.168.56.101 rac1:192.168.56.103 passed rac1:192.168.56.101 rac2:192.168.56.102 passed rac1:192.168.56.101 rac2:192.168.56.108 passed rac1:192.168.56.101 rac2:192.168.56.104 passed rac1:192.168.56.101 rac3:192.168.56.105 passed Result: TCP connectivity check passed for subnet "192.168.56.0" Checking subnet mask consistency... Subnet mask consistency check passed for subnet "192.168.56.0". Subnet mask consistency check passed. Result: Node connectivity check passed Checking multicast communication... Checking subnet "192.168.56.0" for multicast communication with multicast group "230.0.1.0"... Check of subnet "192.168.56.0" for multicast communication with multicast group "230.0.1.0" passed. Check of multicast communication passed. Checking CRS integrity... Clusterware version consistency passed The Oracle Clusterware is healthy on node "rac1" The Oracle Clusterware is healthy on node "rac2" CRS integrity check passed Checking shared resources... Checking CRS home location... "/u01/app/11.2.3/grid" is shared Result: Shared resources check for node addition passed Checking node connectivity... Checking hosts config file... Node Name Status ------------------------------------ ------------------------ rac1 passed rac2 passed rac3 passed Verification of the hosts config file successful Interface information for node "rac1" Name IP Address Subnet Gateway Def. Gateway HW Address MTU ------ --------------- --------------- --------------- --------------- ----------------- ------ eth0 10.10.100.8 10.10.100.0 0.0.0.0 10.10.100.8 08:00:27:4C:F3:6B 1500 eth0 169.254.124.110 169.254.0.0 0.0.0.0 10.10.100.8 08:00:27:4C:F3:6B 1500 eth2 192.168.56.101 192.168.56.0 0.0.0.0 10.10.100.8 08:00:27:03:7F:93 1500 eth2 192.168.56.103 192.168.56.0 0.0.0.0 10.10.100.8 08:00:27:03:7F:93 1500 Interface information for node "rac2" Name IP Address Subnet Gateway Def. Gateway HW Address MTU ------ --------------- --------------- --------------- --------------- ----------------- ------ eth0 10.10.100.18 10.10.100.0 0.0.0.0 10.10.100.18 08:00:27:5A:38:E5 1500 eth0 169.254.136.19 169.254.0.0 0.0.0.0 10.10.100.18 08:00:27:5A:38:E5 1500 eth2 192.168.56.102 192.168.56.0 0.0.0.0 10.10.100.18 08:00:27:49:3B:EA 1500 eth2 192.168.56.108 192.168.56.0 0.0.0.0 10.10.100.18 08:00:27:49:3B:EA 1500 eth2 192.168.56.104 192.168.56.0 0.0.0.0 10.10.100.18 08:00:27:49:3B:EA 1500 Interface information for node "rac3" Name IP Address Subnet Gateway Def. Gateway HW Address MTU ------ --------------- --------------- --------------- --------------- ----------------- ------ eth0 10.10.100.28 10.10.100.0 0.0.0.0 10.10.100.28 08:00:27:CD:CF:BA 1500 eth2 192.168.56.105 192.168.56.0 0.0.0.0 10.10.100.28 08:00:27:CD:42:B4 1500 Check: Node connectivity for interface "eth0" Source Destination Connected? ------------------------------ ------------------------------ ---------------- rac1[10.10.100.8] rac2[10.10.100.18] yes rac1[10.10.100.8] rac3[10.10.100.28] yes rac2[10.10.100.18] rac3[10.10.100.28] yes Result: Node connectivity passed for interface "eth0" Check: TCP connectivity of subnet "10.10.100.0" Source Destination Connected? ------------------------------ ------------------------------ ---------------- rac1:10.10.100.8 rac2:10.10.100.18 passed rac1:10.10.100.8 rac3:10.10.100.28 passed Result: TCP connectivity check passed for subnet "10.10.100.0" Check: Node connectivity for interface "eth2" Source Destination Connected? ------------------------------ ------------------------------ ---------------- rac1[192.168.56.101] rac1[192.168.56.103] yes rac1[192.168.56.101] rac2[192.168.56.102] yes rac1[192.168.56.101] rac2[192.168.56.108] yes rac1[192.168.56.101] rac2[192.168.56.104] yes rac1[192.168.56.101] rac3[192.168.56.105] yes rac1[192.168.56.103] rac2[192.168.56.102] yes rac1[192.168.56.103] rac2[192.168.56.108] yes rac1[192.168.56.103] rac2[192.168.56.104] yes rac1[192.168.56.103] rac3[192.168.56.105] yes rac2[192.168.56.102] rac2[192.168.56.108] yes rac2[192.168.56.102] rac2[192.168.56.104] yes rac2[192.168.56.102] rac3[192.168.56.105] yes rac2[192.168.56.108] rac2[192.168.56.104] yes rac2[192.168.56.108] rac3[192.168.56.105] yes rac2[192.168.56.104] rac3[192.168.56.105] yes Result: Node connectivity passed for interface "eth2" Check: TCP connectivity of subnet "192.168.56.0" Source Destination Connected? ------------------------------ ------------------------------ ---------------- rac1:192.168.56.101 rac1:192.168.56.103 passed rac1:192.168.56.101 rac2:192.168.56.102 passed rac1:192.168.56.101 rac2:192.168.56.108 passed rac1:192.168.56.101 rac2:192.168.56.104 passed rac1:192.168.56.101 rac3:192.168.56.105 passed Result: TCP connectivity check passed for subnet "192.168.56.0" Checking subnet mask consistency... Subnet mask consistency check passed for subnet "10.10.100.0". Subnet mask consistency check passed for subnet "192.168.56.0". Subnet mask consistency check passed. Result: Node connectivity check passed Checking multicast communication... Checking subnet "10.10.100.0" for multicast communication with multicast group "230.0.1.0"... Check of subnet "10.10.100.0" for multicast communication with multicast group "230.0.1.0" passed. Checking subnet "192.168.56.0" for multicast communication with multicast group "230.0.1.0"... Check of subnet "192.168.56.0" for multicast communication with multicast group "230.0.1.0" passed. Check of multicast communication passed. Check: Total memory Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac1 3.7421GB (3923824.0KB) 1.5GB (1572864.0KB) passed rac3 3.7421GB (3923824.0KB) 1.5GB (1572864.0KB) passed Result: Total memory check passed Check: Available memory Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac1 2.6738GB (2803704.0KB) 50MB (51200.0KB) passed rac3 3.5945GB (3769092.0KB) 50MB (51200.0KB) passed Result: Available memory check passed Check: Swap space Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac1 8GB (8388604.0KB) 3.7421GB (3923824.0KB) passed rac3 3.875GB (4063228.0KB) 3.7421GB (3923824.0KB) passed Result: Swap space check passed Check: Free disk space for "rac1:/u01/app/11.2.3/grid,rac1:/tmp" Path Node Name Mount point Available Required Status ---------------- ------------ ------------ ------------ ------------ ------------ /u01/app/11.2.3/grid rac1 / 168.1484GB 7.5GB passed /tmp rac1 / 168.1484GB 7.5GB passed Result: Free disk space check passed for "rac1:/u01/app/11.2.3/grid,rac1:/tmp" Check: Free disk space for "rac3:/u01/app/11.2.3/grid,rac3:/tmp" Path Node Name Mount point Available Required Status ---------------- ------------ ------------ ------------ ------------ ------------ /u01/app/11.2.3/grid rac3 / 44.8223GB 7.5GB passed /tmp rac3 / 44.8223GB 7.5GB passed Result: Free disk space check passed for "rac3:/u01/app/11.2.3/grid,rac3:/tmp" Check: User existence for "grid" Node Name Status Comment ------------ ------------------------ ------------------------ rac1 passed exists(1100) rac3 passed exists(1100) Checking for multiple users with UID value 1100 Result: Check for multiple users with UID value 1100 passed Result: User existence check passed for "grid" Check: Run level Node Name run level Required Status ------------ ------------------------ ------------------------ ---------- rac1 5 3,5 passed rac3 5 3,5 passed Result: Run level check passed Check: Hard limits for "maximum open file descriptors" Node Name Type Available Required Status ---------------- ------------ ------------ ------------ ---------------- rac1 hard 65536 65536 passed rac3 hard 65536 65536 passed Result: Hard limits check passed for "maximum open file descriptors" Check: Soft limits for "maximum open file descriptors" Node Name Type Available Required Status ---------------- ------------ ------------ ------------ ---------------- rac1 soft 1024 1024 passed rac3 soft 1024 1024 passed Result: Soft limits check passed for "maximum open file descriptors" Check: Hard limits for "maximum user processes" Node Name Type Available Required Status ---------------- ------------ ------------ ------------ ---------------- rac1 hard 16384 16384 passed rac3 hard 16384 16384 passed Result: Hard limits check passed for "maximum user processes" Check: Soft limits for "maximum user processes" Node Name Type Available Required Status ---------------- ------------ ------------ ------------ ---------------- rac1 soft 2047 2047 passed rac3 soft 2047 2047 passed Result: Soft limits check passed for "maximum user processes" Check: System architecture Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac1 x86_64 x86_64 passed rac3 x86_64 x86_64 passed Result: System architecture check passed Check: Kernel version Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac1 2.6.32-504.el6.x86_64 2.6.9 passed rac3 2.6.32-504.el6.x86_64 2.6.9 passed Result: Kernel version check passed Check: Kernel parameter for "semmsl" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac1 250 250 250 passed rac3 250 250 250 passed Result: Kernel parameter check passed for "semmsl" Check: Kernel parameter for "semmns" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac1 32000 32000 32000 passed rac3 32000 32000 32000 passed Result: Kernel parameter check passed for "semmns" Check: Kernel parameter for "semopm" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac1 100 100 100 passed rac3 100 100 100 passed Result: Kernel parameter check passed for "semopm" Check: Kernel parameter for "semmni" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac1 128 128 128 passed rac3 128 128 128 passed Result: Kernel parameter check passed for "semmni" Check: Kernel parameter for "shmmax" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac1 68719476736 68719476736 2008997888 passed rac3 68719476736 68719476736 2008997888 passed Result: Kernel parameter check passed for "shmmax" Check: Kernel parameter for "shmmni" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac1 4096 4096 4096 passed rac3 4096 4096 4096 passed Result: Kernel parameter check passed for "shmmni" Check: Kernel parameter for "shmall" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac1 4294967296 4294967296 2097152 passed rac3 4294967296 4294967296 2097152 passed Result: Kernel parameter check passed for "shmall" Check: Kernel parameter for "file-max" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac1 6815744 6815744 6815744 passed rac3 6815744 6815744 6815744 passed Result: Kernel parameter check passed for "file-max" Check: Kernel parameter for "ip_local_port_range" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac1 between 9000.0 & 65500.0 between 9000.0 & 65500.0 between 9000.0 & 65500.0 passed rac3 between 9000.0 & 65500.0 between 9000.0 & 65500.0 between 9000.0 & 65500.0 passed Result: Kernel parameter check passed for "ip_local_port_range" Check: Kernel parameter for "rmem_default" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac1 262144 262144 262144 passed rac3 262144 262144 262144 passed Result: Kernel parameter check passed for "rmem_default" Check: Kernel parameter for "rmem_max" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac1 4194304 4194304 4194304 passed rac3 4194304 4194304 4194304 passed Result: Kernel parameter check passed for "rmem_max" Check: Kernel parameter for "wmem_default" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac1 262144 262144 262144 passed rac3 262144 262144 262144 passed Result: Kernel parameter check passed for "wmem_default" Check: Kernel parameter for "wmem_max" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac1 1048586 1048586 1048576 passed rac3 1048586 1048586 1048576 passed Result: Kernel parameter check passed for "wmem_max" Check: Kernel parameter for "aio-max-nr" Node Name Current Configured Required Status Comment ---------------- ------------ ------------ ------------ ------------ ------------ rac1 1048576 1048576 1048576 passed rac3 1048576 1048576 1048576 passed Result: Kernel parameter check passed for "aio-max-nr" Check: Package existence for "make" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac1 make-3.81-20.el6 make-3.80 passed rac3 make-3.81-20.el6 make-3.80 passed Result: Package existence check passed for "make" Check: Package existence for "binutils" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac1 binutils-2.20.51.0.2-5.43.el6 binutils-2.15.92.0.2 passed rac3 binutils-2.20.51.0.2-5.43.el6 binutils-2.15.92.0.2 passed Result: Package existence check passed for "binutils" Check: Package existence for "gcc(x86_64)" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac1 gcc(x86_64)-4.4.7-16.el6 gcc(x86_64)-3.4.6 passed rac3 gcc(x86_64)-4.4.7-16.el6 gcc(x86_64)-3.4.6 passed Result: Package existence check passed for "gcc(x86_64)" Check: Package existence for "libaio(x86_64)" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac1 libaio(x86_64)-0.3.107-10.el6 libaio(x86_64)-0.3.105 passed rac3 libaio(x86_64)-0.3.107-10.el6 libaio(x86_64)-0.3.105 passed Result: Package existence check passed for "libaio(x86_64)" Check: Package existence for "glibc(x86_64)" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac1 glibc(x86_64)-2.12-1.166.el6_7.7 glibc(x86_64)-2.3.4-2.41 passed rac3 glibc(x86_64)-2.12-1.166.el6_7.7 glibc(x86_64)-2.3.4-2.41 passed Result: Package existence check passed for "glibc(x86_64)" Check: Package existence for "compat-libstdc++-33(x86_64)" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac1 compat-libstdc++-33(x86_64)-3.2.3-69.el6 compat-libstdc++-33(x86_64)-3.2.3 passed rac3 compat-libstdc++-33(x86_64)-3.2.3-69.el6 compat-libstdc++-33(x86_64)-3.2.3 passed Result: Package existence check passed for "compat-libstdc++-33(x86_64)" Check: Package existence for "elfutils-libelf(x86_64)" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac1 elfutils-libelf(x86_64)-0.161-3.el6 elfutils-libelf(x86_64)-0.97 passed rac3 elfutils-libelf(x86_64)-0.161-3.el6 elfutils-libelf(x86_64)-0.97 passed Result: Package existence check passed for "elfutils-libelf(x86_64)" Check: Package existence for "elfutils-libelf-devel" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac1 elfutils-libelf-devel-0.161-3.el6 elfutils-libelf-devel-0.97 passed rac3 elfutils-libelf-devel-0.161-3.el6 elfutils-libelf-devel-0.97 passed Result: Package existence check passed for "elfutils-libelf-devel" Check: Package existence for "glibc-common" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac1 glibc-common-2.12-1.166.el6_7.7 glibc-common-2.3.4 passed rac3 glibc-common-2.12-1.166.el6_7.7 glibc-common-2.3.4 passed Result: Package existence check passed for "glibc-common" Check: Package existence for "glibc-devel(x86_64)" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac1 glibc-devel(x86_64)-2.12-1.166.el6_7.7 glibc-devel(x86_64)-2.3.4 passed rac3 glibc-devel(x86_64)-2.12-1.166.el6_7.7 glibc-devel(x86_64)-2.3.4 passed Result: Package existence check passed for "glibc-devel(x86_64)" Check: Package existence for "glibc-headers" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac1 glibc-headers-2.12-1.166.el6_7.7 glibc-headers-2.3.4 passed rac3 glibc-headers-2.12-1.166.el6_7.7 glibc-headers-2.3.4 passed Result: Package existence check passed for "glibc-headers" Check: Package existence for "gcc-c++(x86_64)" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac1 gcc-c++(x86_64)-4.4.7-16.el6 gcc-c++(x86_64)-3.4.6 passed rac3 gcc-c++(x86_64)-4.4.7-16.el6 gcc-c++(x86_64)-3.4.6 passed Result: Package existence check passed for "gcc-c++(x86_64)" Check: Package existence for "libaio-devel(x86_64)" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac1 libaio-devel(x86_64)-0.3.107-10.el6 libaio-devel(x86_64)-0.3.105 passed rac3 libaio-devel(x86_64)-0.3.107-10.el6 libaio-devel(x86_64)-0.3.105 passed Result: Package existence check passed for "libaio-devel(x86_64)" Check: Package existence for "libgcc(x86_64)" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac1 libgcc(x86_64)-4.4.7-16.el6 libgcc(x86_64)-3.4.6 passed rac3 libgcc(x86_64)-4.4.7-16.el6 libgcc(x86_64)-3.4.6 passed Result: Package existence check passed for "libgcc(x86_64)" Check: Package existence for "libstdc++(x86_64)" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac1 libstdc++(x86_64)-4.4.7-16.el6 libstdc++(x86_64)-3.4.6 passed rac3 libstdc++(x86_64)-4.4.7-16.el6 libstdc++(x86_64)-3.4.6 passed Result: Package existence check passed for "libstdc++(x86_64)" Check: Package existence for "libstdc++-devel(x86_64)" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac1 libstdc++-devel(x86_64)-4.4.7-16.el6 libstdc++-devel(x86_64)-3.4.6 passed rac3 libstdc++-devel(x86_64)-4.4.7-16.el6 libstdc++-devel(x86_64)-3.4.6 passed Result: Package existence check passed for "libstdc++-devel(x86_64)" Check: Package existence for "sysstat" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac1 sysstat-9.0.4-27.el6 sysstat-5.0.5 passed rac3 sysstat-9.0.4-27.el6 sysstat-5.0.5 passed Result: Package existence check passed for "sysstat" Check: Package existence for "pdksh" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac1 pdksh-5.2.14-30 pdksh-5.2.14 passed rac3 pdksh-5.2.14-30 pdksh-5.2.14 passed Result: Package existence check passed for "pdksh" Check: Package existence for "expat(x86_64)" Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- rac1 expat(x86_64)-2.0.1-11.el6_2 expat(x86_64)-1.95.7 passed rac3 expat(x86_64)-2.0.1-11.el6_2 expat(x86_64)-1.95.7 passed Result: Package existence check passed for "expat(x86_64)" Checking for multiple users with UID value 0 Result: Check for multiple users with UID value 0 passed Check: Current group ID Result: Current group ID check passed Starting check for consistency of primary group of root user Node Name Status ------------------------------------ ------------------------ rac1 passed rac3 passed Check for consistency of root user's primary group passed Checking OCR integrity... OCR integrity check passed Checking Oracle Cluster Voting Disk configuration... Oracle Cluster Voting Disk configuration check passed Check: Time zone consistency Result: Time zone consistency check passed Starting Clock synchronization checks using Network Time Protocol(NTP)... NTP Configuration file check started... Network Time Protocol(NTP) configuration file not found on any of the nodes. Oracle Cluster Time Synchronization Service(CTSS) can be used instead of NTP for time synchronization on the cluster nodes No NTP Daemons or Services were found to be running Result: Clock synchronization check using Network Time Protocol(NTP) passed Checking to make sure user "grid" is not in "root" group Node Name Status Comment ------------ ------------------------ ------------------------ rac1 passed does not exist rac3 passed does not exist Result: User "grid" is not part of "root" group. Check passed Checking consistency of file "/etc/resolv.conf" across nodes Checking the file "/etc/resolv.conf" to make sure only one of domain and search entries is defined File "/etc/resolv.conf" does not have both domain and search entries defined Checking if domain entry in file "/etc/resolv.conf" is consistent across the nodes... domain entry in file "/etc/resolv.conf" is consistent across nodes Checking if search entry in file "/etc/resolv.conf" is consistent across the nodes... search entry in file "/etc/resolv.conf" is consistent across nodes Checking DNS response time for an unreachable node Node Name Status ------------------------------------ ------------------------ rac1 failed rac3 failed PRVF-5636 : The DNS response time for an unreachable node exceeded "15000" ms on following nodes: rac1,rac3 File "/etc/resolv.conf" is not consistent across nodes Pre-check for node addition was unsuccessful on all the nodes. |
|
[grid@rac1 ~]$ cluvfy stage -post hwos -n rac3 Performing post-checks for hardware and operating system setup Checking node reachability... Node reachability check passed from node "rac1" Checking user equivalence... User equivalence check passed for user "grid" Checking node connectivity... Checking hosts config file... Verification of the hosts config file successful Node connectivity passed for subnet "10.10.100.0" with node(s) rac3 TCP connectivity check passed for subnet "10.10.100.0" Node connectivity passed for subnet "192.168.56.0" with node(s) rac3 TCP connectivity check passed for subnet "192.168.56.0" Interfaces found on subnet "10.10.100.0" that are likely candidates for VIP are: rac3 eth0:10.10.100.28 Interfaces found on subnet "192.168.56.0" that are likely candidates for a private interconnect are: rac3 eth2:192.168.56.105 Node connectivity check passed Checking multicast communication... Checking subnet "10.10.100.0" for multicast communication with multicast group "230.0.1.0"... Check of subnet "10.10.100.0" for multicast communication with multicast group "230.0.1.0" passed. Checking subnet "192.168.56.0" for multicast communication with multicast group "230.0.1.0"... Check of subnet "192.168.56.0" for multicast communication with multicast group "230.0.1.0" passed. Check of multicast communication passed. Check for multiple users with UID value 0 passed Time zone consistency check passed Checking shared storage accessibility... Disk Sharing Nodes (1 in count) ------------------------------------ ------------------------ /dev/sda rac3 Disk Sharing Nodes (1 in count) ------------------------------------ ------------------------ /dev/sdb rac3 /dev/sdc rac3 /dev/sdd rac3 /dev/sde rac3 /dev/sdf rac3 /dev/sdg rac3 Shared storage check was successful on nodes "rac3" Post-check for hardware and operating system setup was successful. |
2.
|
[grid@rac1 ~]$ export IGNORE_PREADDNODE_CHECKS=Y [grid@rac1 ~]$ /u01/app/11.2.3/grid/oui/bin/addNode.sh -silent "CLUSTER_NEW_NODES={rac3}" "CLUSTER_NEW_VIRTUAL_HOSTNAMES={rac3-vip}" "CLUSTER_NEW_PRIVATE_NODE_NAMES={rac3-priv}" Starting Oracle Universal Installer... Checking swap space: must be greater than 500 MB. Actual 8191 MB Passed Oracle Universal Installer, Version 11.2.0.3.0 Production Copyright (C) 1999, 2011, Oracle. All rights reserved. Performing tests to see whether nodes rac2,rac3 are available ............................................................... 100% Done. .. ----------------------------------------------------------------------------- Cluster Node Addition Summary Global Settings Source: /u01/app/11.2.3/grid New Nodes Space Requirements New Nodes rac3 /: Required 4.04GB : Available 41.73GB Installed Products Product Names Oracle Grid Infrastructure 11.2.0.3.0 Sun JDK 1.5.0.30.03 Installer SDK Component 11.2.0.3.0 Oracle One-Off Patch Installer 11.2.0.1.7 Oracle Universal Installer 11.2.0.3.0 Oracle USM Deconfiguration 11.2.0.3.0 Oracle Configuration Manager Deconfiguration 10.3.1.0.0 Enterprise Manager Common Core Files 10.2.0.4.4 Oracle DBCA Deconfiguration 11.2.0.3.0 Oracle RAC Deconfiguration 11.2.0.3.0 Oracle Quality of Service Management (Server) 11.2.0.3.0 Installation Plugin Files 11.2.0.3.0 Universal Storage Manager Files 11.2.0.3.0 Oracle Text Required Support Files 11.2.0.3.0 Automatic Storage Management Assistant 11.2.0.3.0 Oracle Database 11g Multimedia Files 11.2.0.3.0 Oracle Multimedia Java Advanced Imaging 11.2.0.3.0 Oracle Globalization Support 11.2.0.3.0 Oracle Multimedia Locator RDBMS Files 11.2.0.3.0 Oracle Core Required Support Files 11.2.0.3.0 Bali Share 1.1.18.0.0 Oracle Database Deconfiguration 11.2.0.3.0 Oracle Quality of Service Management (Client) 11.2.0.3.0 Expat libraries 2.0.1.0.1 Oracle Containers for Java 11.2.0.3.0 Perl Modules 5.10.0.0.1 Secure Socket Layer 11.2.0.3.0 Oracle JDBC/OCI Instant Client 11.2.0.3.0 Oracle Multimedia Client Option 11.2.0.3.0 LDAP Required Support Files 11.2.0.3.0 Character Set Migration Utility 11.2.0.3.0 Perl Interpreter 5.10.0.0.2 PL/SQL Embedded Gateway 11.2.0.3.0 OLAP SQL Scripts 11.2.0.3.0 Database SQL Scripts 11.2.0.3.0 Oracle Extended Windowing Toolkit 3.4.47.0.0 SSL Required Support Files for InstantClient 11.2.0.3.0 SQL*Plus Files for Instant Client 11.2.0.3.0 Oracle Net Required Support Files 11.2.0.3.0 Oracle Database User Interface 2.2.13.0.0 RDBMS Required Support Files for Instant Client 11.2.0.3.0 RDBMS Required Support Files Runtime 11.2.0.3.0 XML Parser for Java 11.2.0.3.0 Oracle Security Developer Tools 11.2.0.3.0 Oracle Wallet Manager 11.2.0.3.0 Enterprise Manager plugin Common Files 11.2.0.3.0 Platform Required Support Files 11.2.0.3.0 Oracle JFC Extended Windowing Toolkit 4.2.36.0.0 RDBMS Required Support Files 11.2.0.3.0 Oracle Ice Browser 5.2.3.6.0 Oracle Help For Java 4.2.9.0.0 Enterprise Manager Common Files 10.2.0.4.3 Deinstallation Tool 11.2.0.3.0 Oracle Java Client 11.2.0.3.0 Cluster Verification Utility Files 11.2.0.3.0 Oracle Notification Service (eONS) 11.2.0.3.0 Oracle LDAP administration 11.2.0.3.0 Cluster Verification Utility Common Files 11.2.0.3.0 Oracle Clusterware RDBMS Files 11.2.0.3.0 Oracle Locale Builder 11.2.0.3.0 Oracle Globalization Support 11.2.0.3.0 Buildtools Common Files 11.2.0.3.0 Oracle RAC Required Support Files-HAS 11.2.0.3.0 SQL*Plus Required Support Files 11.2.0.3.0 XDK Required Support Files 11.2.0.3.0 Agent Required Support Files 10.2.0.4.3 Parser Generator Required Support Files 11.2.0.3.0 Precompiler Required Support Files 11.2.0.3.0 Installation Common Files 11.2.0.3.0 Required Support Files 11.2.0.3.0 Oracle JDBC/THIN Interfaces 11.2.0.3.0 Oracle Multimedia Locator 11.2.0.3.0 Oracle Multimedia 11.2.0.3.0 HAS Common Files 11.2.0.3.0 Assistant Common Files 11.2.0.3.0 PL/SQL 11.2.0.3.0 HAS Files for DB 11.2.0.3.0 Oracle Recovery Manager 11.2.0.3.0 Oracle Database Utilities 11.2.0.3.0 Oracle Notification Service 11.2.0.3.0 SQL*Plus 11.2.0.3.0 Oracle Netca Client 11.2.0.3.0 Oracle Net 11.2.0.3.0 Oracle JVM 11.2.0.3.0 Oracle Internet Directory Client 11.2.0.3.0 Oracle Net Listener 11.2.0.3.0 Cluster Ready Services Files 11.2.0.3.0 Oracle Database 11g 11.2.0.3.0 ----------------------------------------------------------------------------- Instantiating scripts for add node (Tuesday, April 19, 2016 12:33:09 PM CST) . 1% Done. Instantiation of add node scripts complete Copying to remote nodes (Tuesday, April 19, 2016 12:33:13 PM CST) ............................................................................................... 96% Done. Home copied to new nodes Saving inventory on nodes (Tuesday, April 19, 2016 12:40:52 PM CST) . 100% Done. Save inventory complete WARNING:A new inventory has been created on one or more nodes in this session. However, it has not yet been registered as the central inventory of this system. To register the new inventory please run the script at '/u01/app/oraInventory/orainstRoot.sh' with root privileges on nodes 'rac3'. If you do not register the inventory, you may not be able to update or patch the products you installed. The following configuration scripts need to be executed as the "root" user in each new cluster node. Each script in the list below is followed by a list of nodes. /u01/app/oraInventory/orainstRoot.sh #On nodes rac3 /u01/app/11.2.3/grid/root.sh #On nodes rac3 To execute the configuration scripts: 1. Open a terminal window 2. Log in as "root" 3. Run the scripts in each cluster node The Cluster Node Addition of /u01/app/11.2.3/grid was successful. Please check '/tmp/silentInstall.log' for more details. |
|
[root@rac3 ~]# /u01/app/oraInventory/orainstRoot.sh Creating the Oracle inventory pointer file (/etc/oraInst.loc) Changing permissions of /u01/app/oraInventory. Adding read,write permissions for group. Removing read,write,execute permissions for world. Changing groupname of /u01/app/oraInventory to oinstall. The execution of the script is complete. [root@rac3 ~]# /u01/app/11.2.3/grid/root.sh Performing root user operation for Oracle 11g The following environment variables are set as: ORACLE_OWNER= grid ORACLE_HOME= /u01/app/11.2.3/grid Enter the full pathname of the local bin directory: [/usr/local/bin]: Copying dbhome to /usr/local/bin ... Copying oraenv to /usr/local/bin ... Copying coraenv to /usr/local/bin ... Creating /etc/oratab file... Entries will be added to the /etc/oratab file as needed by Database Configuration Assistant when a database is created Finished running generic part of root script. Now product-specific root actions will be performed. Using configuration parameter file: /u01/app/11.2.3/grid/crs/install/crsconfig_params Creating trace directory User ignored Prerequisites during installation OLR initialization - successful Adding Clusterware entries to upstart CRS-4402: The CSS daemon was started in exclusive mode but found an active CSS daemon on node rac1, number 1, and is terminating An active cluster was found during exclusive startup, restarting to join the cluster clscfg: EXISTING configuration version 5 detected. clscfg: version 5 is 11g Release 2. Successfully accumulated necessary OCR keys. Creating OCR keys for user 'root', privgrp 'root'.. Operation successful. Configure Oracle Grid Infrastructure for a Cluster ... succeeded |
3.
|
[root@rac1 rpm]# su - oracle [oracle@rac1 ~]$ cd $ORACLE_HOME [oracle@rac1 dbhome_1]$ cd oui/bin/ [oracle@rac1 bin]$ ./addNode.sh -silent "CLUSTER_NEW_NODES={rac3}" Performing pre-checks for node addition Checking node reachability... Node reachability check passed from node "rac1" Checking user equivalence... User equivalence check passed for user "oracle" WARNING: Node "rac3" already appears to be part of cluster Pre-check for node addition was successful. Starting Oracle Universal Installer... Checking swap space: must be greater than 500 MB. Actual 8191 MB Passed Oracle Universal Installer, Version 11.2.0.3.0 Production Copyright (C) 1999, 2011, Oracle. All rights reserved. Performing tests to see whether nodes rac2,rac3 are available ............................................................... 100% Done. .. ----------------------------------------------------------------------------- Cluster Node Addition Summary Global Settings Source: /u01/app/oracle/product/11.2.3/dbhome_1 New Nodes Space Requirements New Nodes rac3 /: Required 4.13GB : Available 38.61GB Installed Products Product Names Oracle Database 11g 11.2.0.3.0 Sun JDK 1.5.0.30.03 Installer SDK Component 11.2.0.3.0 Oracle One-Off Patch Installer 11.2.0.1.7 Oracle Universal Installer 11.2.0.3.0 Oracle USM Deconfiguration 11.2.0.3.0 Oracle Configuration Manager Deconfiguration 10.3.1.0.0 Oracle DBCA Deconfiguration 11.2.0.3.0 Oracle RAC Deconfiguration 11.2.0.3.0 Oracle Database Deconfiguration 11.2.0.3.0 Oracle Configuration Manager Client 10.3.2.1.0 Oracle Configuration Manager 10.3.5.0.1 Oracle ODBC Driverfor Instant Client 11.2.0.3.0 LDAP Required Support Files 11.2.0.3.0 SSL Required Support Files for InstantClient 11.2.0.3.0 Bali Share 1.1.18.0.0 Oracle Extended Windowing Toolkit 3.4.47.0.0 Oracle JFC Extended Windowing Toolkit 4.2.36.0.0 Oracle Real Application Testing 11.2.0.3.0 Oracle Database Vault J2EE Application 11.2.0.3.0 Oracle Label Security 11.2.0.3.0 Oracle Data Mining RDBMS Files 11.2.0.3.0 Oracle OLAP RDBMS Files 11.2.0.3.0 Oracle OLAP API 11.2.0.3.0 Platform Required Support Files 11.2.0.3.0 Oracle Database Vault option 11.2.0.3.0 Oracle RAC Required Support Files-HAS 11.2.0.3.0 SQL*Plus Required Support Files 11.2.0.3.0 Oracle Display Fonts 9.0.2.0.0 Oracle Ice Browser 5.2.3.6.0 Oracle JDBC Server Support Package 11.2.0.3.0 Oracle SQL Developer 11.2.0.3.0 Oracle Application Express 11.2.0.3.0 XDK Required Support Files 11.2.0.3.0 RDBMS Required Support Files for Instant Client 11.2.0.3.0 SQLJ Runtime 11.2.0.3.0 Database Workspace Manager 11.2.0.3.0 RDBMS Required Support Files Runtime 11.2.0.3.0 Oracle Globalization Support 11.2.0.3.0 Exadata Storage Server 11.2.0.1.0 Provisioning Advisor Framework 10.2.0.4.3 Enterprise Manager Database Plugin -- Repository Support 11.2.0.3.0 Enterprise Manager Repository Core Files 10.2.0.4.4 Enterprise Manager Database Plugin -- Agent Support 11.2.0.3.0 Enterprise Manager Grid Control Core Files 10.2.0.4.4 Enterprise Manager Common Core Files 10.2.0.4.4 Enterprise Manager Agent Core Files 10.2.0.4.4 RDBMS Required Support Files 11.2.0.3.0 regexp 2.1.9.0.0 Agent Required Support Files 10.2.0.4.3 Oracle 11g Warehouse Builder Required Files 11.2.0.3.0 Oracle Notification Service (eONS) 11.2.0.3.0 Oracle Text Required Support Files 11.2.0.3.0 Parser Generator Required Support Files 11.2.0.3.0 Oracle Database 11g Multimedia Files 11.2.0.3.0 Oracle Multimedia Java Advanced Imaging 11.2.0.3.0 Oracle Multimedia Annotator 11.2.0.3.0 Oracle JDBC/OCI Instant Client 11.2.0.3.0 Oracle Multimedia Locator RDBMS Files 11.2.0.3.0 Precompiler Required Support Files 11.2.0.3.0 Oracle Core Required Support Files 11.2.0.3.0 Sample Schema Data 11.2.0.3.0 Oracle Starter Database 11.2.0.3.0 Oracle Message Gateway Common Files 11.2.0.3.0 Oracle XML Query 11.2.0.3.0 XML Parser for Oracle JVM 11.2.0.3.0 Oracle Help For Java 4.2.9.0.0 Installation Plugin Files 11.2.0.3.0 Enterprise Manager Common Files 10.2.0.4.3 Expat libraries 2.0.1.0.1 Deinstallation Tool 11.2.0.3.0 Oracle Quality of Service Management (Client) 11.2.0.3.0 Perl Modules 5.10.0.0.1 JAccelerator (COMPANION) 11.2.0.3.0 Oracle Containers for Java 11.2.0.3.0 Perl Interpreter 5.10.0.0.2 Oracle Net Required Support Files 11.2.0.3.0 Secure Socket Layer 11.2.0.3.0 Oracle Universal Connection Pool 11.2.0.3.0 Oracle JDBC/THIN Interfaces 11.2.0.3.0 Oracle Multimedia Client Option 11.2.0.3.0 Oracle Java Client 11.2.0.3.0 Character Set Migration Utility 11.2.0.3.0 Oracle Code Editor 1.2.1.0.0I PL/SQL Embedded Gateway 11.2.0.3.0 OLAP SQL Scripts 11.2.0.3.0 Database SQL Scripts 11.2.0.3.0 Oracle Locale Builder 11.2.0.3.0 Oracle Globalization Support 11.2.0.3.0 SQL*Plus Files for Instant Client 11.2.0.3.0 Required Support Files 11.2.0.3.0 Oracle Database User Interface 2.2.13.0.0 Oracle ODBC Driver 11.2.0.3.0 Oracle Notification Service 11.2.0.3.0 XML Parser for Java 11.2.0.3.0 Oracle Security Developer Tools 11.2.0.3.0 Oracle Wallet Manager 11.2.0.3.0 Cluster Verification Utility Common Files 11.2.0.3.0 Oracle Clusterware RDBMS Files 11.2.0.3.0 Oracle UIX 2.2.24.6.0 Enterprise Manager plugin Common Files 11.2.0.3.0 HAS Common Files 11.2.0.3.0 Precompiler Common Files 11.2.0.3.0 Installation Common Files 11.2.0.3.0 Oracle Help for the Web 2.0.14.0.0 Oracle LDAP administration 11.2.0.3.0 Buildtools Common Files 11.2.0.3.0 Assistant Common Files 11.2.0.3.0 Oracle Recovery Manager 11.2.0.3.0 PL/SQL 11.2.0.3.0 Generic Connectivity Common Files 11.2.0.3.0 Oracle Database Gateway for ODBC 11.2.0.3.0 Oracle Programmer 11.2.0.3.0 Oracle Database Utilities 11.2.0.3.0 Enterprise Manager Agent 10.2.0.4.3 SQL*Plus 11.2.0.3.0 Oracle Netca Client 11.2.0.3.0 Oracle Multimedia Locator 11.2.0.3.0 Oracle Call Interface (OCI) 11.2.0.3.0 Oracle Multimedia 11.2.0.3.0 Oracle Net 11.2.0.3.0 Oracle XML Development Kit 11.2.0.3.0 Database Configuration and Upgrade Assistants 11.2.0.3.0 Oracle JVM 11.2.0.3.0 Oracle Advanced Security 11.2.0.3.0 Oracle Internet Directory Client 11.2.0.3.0 Oracle Enterprise Manager Console DB 11.2.0.3.0 HAS Files for DB 11.2.0.3.0 Oracle Net Listener 11.2.0.3.0 Oracle Text 11.2.0.3.0 Oracle Net Services 11.2.0.3.0 Oracle Database 11g 11.2.0.3.0 Oracle OLAP 11.2.0.3.0 Oracle Spatial 11.2.0.3.0 Oracle Partitioning 11.2.0.3.0 Enterprise Edition Options 11.2.0.3.0 ----------------------------------------------------------------------------- Instantiating scripts for add node (Tuesday, April 19, 2016 12:55:27 PM CST) . 1% Done. Instantiation of add node scripts complete Copying to remote nodes (Tuesday, April 19, 2016 12:55:40 PM CST) ............................................................................................... 96% Done. Home copied to new nodes Saving inventory on nodes (Tuesday, April 19, 2016 1:40:05 PM CST) . 100% Done. Save inventory complete WARNING: The following configuration scripts need to be executed as the "root" user in each new cluster node. Each script in the list below is followed by a list of nodes. /u01/app/oracle/product/11.2.3/dbhome_1/root.sh #On nodes rac3 To execute the configuration scripts: 1. Open a terminal window 2. Log in as "root" 3. Run the scripts in each cluster node The Cluster Node Addition of /u01/app/oracle/product/11.2.3/dbhome_1 was successful. Please check '/tmp/silentInstall.log' for more details. |
|
[root@rac3 ~]# /u01/app/oracle/product/11.2.3/dbhome_1/root.sh Performing root user operation for Oracle 11g The following environment variables are set as: ORACLE_OWNER= oracle ORACLE_HOME= /u01/app/oracle/product/11.2.3/dbhome_1 Enter the full pathname of the local bin directory: [/usr/local/bin]: The contents of "dbhome" have not changed. No need to overwrite. The contents of "oraenv" have not changed. No need to overwrite. The contents of "coraenv" have not changed. No need to overwrite. Entries will be added to the /etc/oratab file as needed by Database Configuration Assistant when a database is created Finished running generic part of root script. Now product-specific root actions will be performed. Finished product-specific root actions. |
4.
|
[oracle@rac1 bin]$dbca |
5.
|
[grid@rac1 ~]$ crsctl status resource -t -------------------------------------------------------------------------------- NAME TARGET STATE SERVER STATE_DETAILS -------------------------------------------------------------------------------- Local Resources -------------------------------------------------------------------------------- ora.CRS.dg ONLINE ONLINE rac1 ONLINE ONLINE rac2 ONLINE ONLINE rac3 ora.DATA.dg ONLINE ONLINE rac1 ONLINE ONLINE rac2 ONLINE ONLINE rac3 ora.LISTENER.lsnr ONLINE ONLINE rac1 ONLINE ONLINE rac2 ONLINE ONLINE rac3 ora.asm ONLINE ONLINE rac1 Started ONLINE ONLINE rac2 Started ONLINE ONLINE rac3 Started ora.gsd OFFLINE OFFLINE rac1 OFFLINE OFFLINE rac2 OFFLINE OFFLINE rac3 ora.net1.network ONLINE ONLINE rac1 ONLINE ONLINE rac2 ONLINE ONLINE rac3 ora.ons ONLINE ONLINE rac1 ONLINE ONLINE rac2 ONLINE ONLINE rac3 -------------------------------------------------------------------------------- Cluster Resources -------------------------------------------------------------------------------- ora.LISTENER_SCAN1.lsnr 1 ONLINE ONLINE rac2 ora.cvu 1 ONLINE ONLINE rac2 ora.kingsql.db 1 ONLINE ONLINE rac1 Open 2 ONLINE ONLINE rac2 Open 3 ONLINE ONLINE rac3 Open ora.oc4j 1 ONLINE ONLINE rac2 ora.rac1.vip 1 ONLINE ONLINE rac1 ora.rac2.vip 1 ONLINE ONLINE rac2 ora.rac3.vip 1 ONLINE ONLINE rac3 ora.scan1.vip 1 ONLINE ONLINE rac2 SQL> select thread#,status,instance from gv$thread; THREAD# STATUS INSTANCE ---------- ------ -------------------------------------------------------------------------------- 1 OPEN kingsql1 2 OPEN kingsql2 3 OPEN kingsql3 1 OPEN kingsql1 2 OPEN kingsql2 3 OPEN kingsql3 1 OPEN kingsql1 2 OPEN kingsql2 3 OPEN kingsql3 9 rows selected. |
|
[oracle@rac3 ~]$ sqlplus / as sysdba SQL*Plus: Release 11.2.0.3.0 Production on Thu May 19 13:00:52 2016 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP, Data Mining and Real Application Testing options SQL> select instance_name from v$instance; INSTANCE_NAME ---------------- kingsql3 |
到此，相信大家對“RAC11G怎么添加節點”有了更深的了解，不妨來實際操作一番吧！這里是億速云網站，更多相關內容可以進入相關頻道進行查詢，關注我們，繼續學習！
免責聲明：本站發布的內容（圖片、視頻和文字）以原創、轉載和分享為主，文章觀點不代表本網站立場，如果涉及侵權請聯系站長郵箱：is@yisu.com進行舉報，并提供相關證據，一經查實，將立刻刪除涉嫌侵權內容。
