溫馨提示×
您好，登錄后才能下訂單哦！
點擊 登錄注冊 即表示同意《億速云用戶服務條款》
您好，登錄后才能下訂單哦！
基于streaming replication搭建的PostgreSQL HA環境,如出現網絡訪問/硬件故障等原因導致Standby節點升級為Master節點,但舊Master節點數據庫并未損壞,在排除故障后舊Master節點是否不需要通過備份方式重新搭建成為Standby節點呢?答案是肯定的,PG提供了pg_rewind這個工具實現.
原理
在PostgreSQL HA環境中,Standby節點升級為Master節點后,時間線會切換為新的時間線,比如從1變為2.而舊Master節點的時間線仍然為原來的時間線,比如仍為1,那么使用pg_rewind工具,舊Master節點如何從新Master節點讀取相關的數據成為新的Standby節點?
簡單來說,有以下幾步:
1.確定新Master和舊Master數據一致性的Checkpoint位置.在該位置上,新Master和舊Master數據完全一致.這可以通過讀取新舊Master節點時間線歷史文件可以獲得,該文件位于$PGDATA/pg_wal/目錄下,文件名稱為XX.history
2.舊Master節點根據上一步獲取的Checkpoint讀取本機日志文件WAL Record,獲取在此Checkpoint之后出現變化的Block,并以鏈表的方式存儲Block編號等信息
3.根據第2步獲取的Block信息從新Master節點拷貝相應的Block,替換舊Master節點相應的Block
4.拷貝新Master節點上除數據文件外的所有其他文件,包括配置文件等(如果拷貝數據文件,與備份方式搭建區別不大)
5.舊Master啟動數據庫,應用從Checkpoint開始后的WAL Record.
示例
考慮兩節點的HA環境,舊Master節點IP為192.168.26.25,Standby節點(新Master)IP為192.168.26.26,模擬主庫宕機,備庫升級為主庫,然后通過pg_rewind把舊Master節點切換為Standby節點.
切換前,26.25節點相關信息
testdb=# select * from pg_stat_replication;
-[ RECORD 1 ]----+------------------------------
pid | 1537
usesysid | 90113
usename | replicator
application_name | standby_26
client_addr | 192.168.26.26
client_hostname |
client_port | 53164
backend_start | 2019-03-27 15:19:09.254987+08
backend_xmin | 654
state | streaming
sent_lsn | 0/6B000060
write_lsn | 0/6B000060
flush_lsn | 0/6B000060
replay_lsn | 0/6B000060
write_lag | 00:00:00.156457
flush_lag | 00:00:00.158792
replay_lag | 00:00:00.158815
sync_priority | 0
sync_state | async
testdb=#
testdb=# select pg_is_in_recovery();
-[ RECORD 1 ]-----+--
pg_is_in_recovery | f
插入測試數據
testdb=# create table t_oldmaster(id int);
CREATE TABLE
testdb=# insert into t_oldmaster select generate_series(1,1000000);
INSERT 0 1000000
testdb=#
切換前26.26節點信息,數據已復制,角色為Standby
testdb=# select count(*) from t_oldmaster;
count
---------
1000000
(1 row)
testdb=# select pg_is_in_recovery();
pg_is_in_recovery
-------------------
t
(1 row)
模擬Master節點宕機
[xdb@localhost testdb]$ ps -ef|grep postgres
xdb 1353 1 0 14:46 pts/1 00:00:00 /appdb/xdb/pg11.2/bin/postgres
xdb 1354 1353 0 14:46 ? 00:00:00 postgres: logger
xdb 1356 1353 0 14:46 ? 00:00:00 postgres: checkpointer
xdb 1357 1353 0 14:46 ? 00:00:00 postgres: background writer
xdb 1358 1353 0 14:46 ? 00:00:00 postgres: walwriter
xdb 1359 1353 0 14:46 ? 00:00:00 postgres: autovacuum launcher
xdb 1360 1353 0 14:46 ? 00:00:00 postgres: archiver last was 00000010000000000000006D
xdb 1361 1353 0 14:46 ? 00:00:00 postgres: stats collector
xdb 1362 1353 0 14:46 ? 00:00:00 postgres: logical replication launcher
xdb 1418 1353 0 15:11 ? 00:00:02 postgres: xdb testdb [local] idle
xdb 1537 1353 0 15:19 ? 00:00:00 postgres: walsender replicator 192.168.26.26(53164) streaming 0/6ED4FDA8
xdb 1555 1317 0 15:25 pts/1 00:00:00 grep --color=auto postgres
[xdb@localhost testdb]$ kill -9 1353
[xdb@localhost testdb]$ ps -ef|grep postgres
xdb 1557 1317 0 15:25 pts/1 00:00:00 grep --color=auto postgres
[xdb@localhost testdb]$
Standby節點執行切換
編輯recovery.conf文件,添加trigger_file和recovery_target_timeline
[xdb@localhost testdb]$ cat recovery.conf
standby_mode = 'on'
primary_conninfo = 'host=192.168.26.25 port=5432 user=replicator password=replicator application_name=standby_26'
restore_command = 'cp /data/archivelog/%f %p'
archive_cleanup_command = 'pg_archivecleanup /data/archivelog %r'
trigger_file = '/tmp/trigger_file'
recovery_target_timeline = 'latest'
#生成trigger文件
[xdb@localhost testdb]$ touch /tmp/trigger_file
重啟Standby節點
[xdb@localhost testdb]$ pg_ctl restart
pg_ctl: PID file "/data/pgsql/testdb/postmaster.pid" does not exist
Is server running?
trying to start server anyway
waiting for server to start....2019-03-27 15:33:28.218 CST [1901] LOG: listening on IPv4 address "0.0.0.0", port 5432
2019-03-27 15:33:28.219 CST [1901] LOG: listening on IPv6 address "::", port 5432
2019-03-27 15:33:28.223 CST [1901] LOG: listening on Unix socket "/tmp/.s.PGSQL.5432"
2019-03-27 15:33:28.253 CST [1901] LOG: redirecting log output to logging collector process
2019-03-27 15:33:28.253 CST [1901] HINT: Future log output will appear in directory "pg_log".
. done
server started
[xdb@localhost testdb]$
日志輸出
2019-03-27 15:33:28.259 CST,,,1903,,5c9b2748.76f,2,,2019-03-27 15:33:28 CST,,0,LOG,00000,"entering standby mode",,,,,,,,,""
2019-03-27 15:33:28.264 CST,,,1903,,5c9b2748.76f,3,,2019-03-27 15:33:28 CST,1/0,0,LOG,00000,"redo starts at 0/6B0164C0",,,,,,,,,""
2019-03-27 15:33:29.416 CST,,,1903,,5c9b2748.76f,4,,2019-03-27 15:33:28 CST,1/0,0,LOG,00000,"consistent recovery state reached at 0/6ED4FDA8",,,,,,,,,""
2019-03-27 15:33:29.416 CST,,,1903,,5c9b2748.76f,5,,2019-03-27 15:33:28 CST,1/0,0,LOG,00000,"invalid record length at 0/6ED4FDA8: wanted 24, got 0",,,,,,,,,""
2019-03-27 15:33:29.416 CST,,,1903,,5c9b2748.76f,6,,2019-03-27 15:33:28 CST,1/0,0,LOG,00000,"trigger file found: /tmp/trigger_file",,,,,,,,,""
2019-03-27 15:33:29.416 CST,,,1903,,5c9b2748.76f,7,,2019-03-27 15:33:28 CST,1/0,0,LOG,00000,"redo done at 0/6ED4FD70",,,,,,,,,""
2019-03-27 15:33:29.416 CST,,,1903,,5c9b2748.76f,8,,2019-03-27 15:33:28 CST,1/0,0,LOG,00000,"last completed transaction was at log time 2019-03-27 15:21:57.519456+08",,,,,,,,,""
2019-03-27 15:33:29.416 CST,,,1901,,5c9b2748.76d,2,,2019-03-27 15:33:28 CST,,0,LOG,00000,"database system is ready to accept read only connections",,,,,,,,,""
2019-03-27 15:33:29.421 CST,,,1903,,5c9b2748.76f,9,,2019-03-27 15:33:28 CST,1/0,0,LOG,00000,"selected new timeline ID: 17",,,,,,,,,""
Standby節點已升級為新Master節點
recovery.conf 文件重命名為 recovery.done
/tmp/trigger_file文件被刪除
pg_is_in_recovery返回false
[xdb@localhost testdb]$ cat recovery.done
standby_mode = 'on'
primary_conninfo = 'host=192.168.26.25 port=5432 user=replicator password=replicator application_name=standby_26'
restore_command = 'cp /data/archivelog/%f %p'
archive_cleanup_command = 'pg_archivecleanup /data/archivelog %r'
trigger_file = '/tmp/trigger_file'
recovery_target_timeline = 'latest'
[root@localhost testdb]# ls -l /tmp/trigger_file
ls: cannot access /tmp/trigger_file: No such file or directory
[xdb@localhost testdb]$ psql -d testdb
psql (11.2)
Type "help" for help.
testdb=# select pg_is_in_recovery();
pg_is_in_recovery
-------------------
f
(1 row)
在pg_wal目錄下生成了時間線history文件
[xdb@localhost testdb]$ ls ./pg_wal/
00000010000000000000006E.partial 00000011000000000000006F 000000110000000000000072
00000010.history 000000110000000000000070 00000011.history
00000011000000000000006E 000000110000000000000071 archive_status
[xdb@localhost testdb]$ cat ./pg_wal/00000011.history
7 0/27000000 no recovery target specified
8 0/2A0012E8 no recovery target specified
12 0/32000000 no recovery target specified
14 0/39A63BD0 no recovery target specified
15 0/40A63B08 no recovery target specified
16 0/6ED4FDA8 no recovery target specified
[xdb@localhost testdb]$ cat ./pg_wal/00000010.history
7 0/27000000 no recovery target specified
8 0/2A0012E8 no recovery target specified
12 0/32000000 no recovery target specified
14 0/39A63BD0 no recovery target specified
15 0/40A63B08 no recovery target specified
生成測試數據
testdb=# create table t_new_master(id int);
CREATE TABLE
testdb=# insert into t_new_master select generate_series(1,1000000);
INSERT 0 1000000
testdb=#
舊Master節點降級為Standby節點
重新啟動舊master節點,插入測試數據,用于模擬時間線分叉后的數據變動
[xdb@localhost testdb]$ pg_ctl start
pg_ctl: another server might be running; trying to start server anyway
waiting for server to start....2019-03-27 15:39:07.989 CST [1561] LOG: listening on IPv4 address "0.0.0.0", port 5432
2019-03-27 15:39:07.989 CST [1561] LOG: listening on IPv6 address "::", port 5432
2019-03-27 15:39:07.991 CST [1561] LOG: listening on Unix socket "/tmp/.s.PGSQL.5432"
2019-03-27 15:39:08.015 CST [1561] LOG: redirecting log output to logging collector process
2019-03-27 15:39:08.015 CST [1561] HINT: Future log output will appear in directory "pg_log".
. done
server started
[xdb@localhost testdb]$ psql -d testdb
psql (11.2)
Type "help" for help.
testdb=#
testdb=# create table t_fork(id int);
CREATE TABLE
testdb=# insert into t_fork select generate_series(1,100000);
INSERT 0 100000
testdb=#
testdb=# \q
[xdb@localhost testdb]$
關閉舊主庫,執行pg_rewind
[xdb@localhost testdb]$ pg_ctl stop
waiting for server to shut down.... done
server stopped
[xdb@localhost testdb]$ pg_rewind --target-pgdata=$PGDATA --source-server="host=192.168.26.26 port=5432 dbname=testdb" --progress --debug -n
connected to server
fetched file "global/pg_control", length 8192
target server needs to use either data checksums or "wal_log_hints = on"
Failure, exiting
主從設置postgres.conf中的wal_log_hints參數為on,重啟數據庫
[xdb@localhost testdb]$ pg_ctl start
waiting for server to start....2019-03-27 15:54:56.038 CST [1603] LOG: listening on IPv4 address "0.0.0.0", port 5432
2019-03-27 15:54:56.038 CST [1603] LOG: listening on IPv6 address "::", port 5432
2019-03-27 15:54:56.042 CST [1603] LOG: listening on Unix socket "/tmp/.s.PGSQL.5432"
2019-03-27 15:54:56.079 CST [1603] LOG: redirecting log output to logging collector process
2019-03-27 15:54:56.079 CST [1603] HINT: Future log output will appear in directory "pg_log".
done
server started
[xdb@localhost testdb]$ pg_ctl stop
waiting for server to shut down.... done
server stopped
再次執行pg_rewind
[xdb@localhost testdb]$ pg_rewind --target-pgdata=$PGDATA --source-server="host=192.168.26.26 port=5432 dbname=testdb" --progress --debug -n
connected to server
fetched file "global/pg_control", length 8192
fetched file "pg_wal/00000011.history", length 261
Source timeline history:
Target timeline history:
7: 0/0 - 0/27000000
8: 0/27000000 - 0/2A0012E8
12: 0/2A0012E8 - 0/32000000
14: 0/32000000 - 0/39A63BD0
15: 0/39A63BD0 - 0/40A63B08
16: 0/40A63B08 - 0/0
servers diverged at WAL location 0/6ED4FDA8 on timeline 16
could not open file "/data/pgsql/testdb/pg_wal/00000010000000000000006E": No such file or directory
could not find previous WAL record at 0/6ED4FDA8
Failure, exiting
[xdb@localhost testdb]$
拷貝本機和新Master節點的歸檔wal文件
[xdb@localhost testdb]$ scp -P 22 root@192.168.26.26:/data/archivelog/* $PGDATA/pg_wal/
The authenticity of host '192.168.26.26 (192.168.26.26)' can't be established.
ECDSA key fingerprint is SHA256:wT+B26a2wJvmsOz8QH2UK6QUqodwBYvDu/WMrmqZ5fU.
ECDSA key fingerprint is MD5:79:63:4d:55:83:d9:d6:78:21:d1:b6:a1:e8:74:0f:b0.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.26.26' (ECDSA) to the list of known hosts.
root@192.168.26.26's password:
00000010000000000000006E.partial 100% 16MB 44.1MB/s 00:00
00000011000000000000006E 100% 16MB 71.5MB/s 00:00
00000011000000000000006F 100% 16MB 47.0MB/s 00:00
000000110000000000000070 100% 16MB 26.7MB/s 00:00
000000110000000000000071 100% 16MB 26.7MB/s 00:00
000000110000000000000072 100% 16MB 31.6MB/s 00:00
000000110000000000000073 100% 16MB 37.1MB/s 00:00
00000011.history 100% 261 323.1KB/s 00:00
[xdb@localhost testdb]$ ls ./pg_wal/
00000010000000000000006A.00000028.backup 000000100000000000000074 00000010.history 000000110000000000000073
00000010000000000000006E.partial 000000100000000000000075 00000011000000000000006E 00000011.history
000000100000000000000070 000000100000000000000076 00000011000000000000006F archive_status
000000100000000000000071 000000100000000000000077 000000110000000000000070 RECOVERYHISTORY
000000100000000000000072 000000100000000000000078 000000110000000000000071
000000100000000000000073 000000100000000000000079 000000110000000000000072
[xdb@localhost testdb]$
[xdb@localhost testdb]$ cp /data/archivelog/20190327/00000010000000000000006* ./pg_wal
重新執行pg_rewind
[xdb@localhost testdb]$ pg_rewind --target-pgdata=$PGDATA --source-server="host=192.168.26.26 port=5432 dbname=testdb" --progress -n
connected to server
servers diverged at WAL location 0/6ED4FDA8 on timeline 16
rewinding from last common checkpoint at 0/6B0164F8 on timeline 16
reading source file list
reading target file list
reading WAL in target
need to copy 296 MB (total source directory size is 437 MB)
303659/303659 kB (100%) copied
creating backup label and updating control file
syncing target data directory
Done!
修改配置文件recovery.conf
[xdb@localhost testdb]$ scp -P 22 root@192.168.26.26:$PGDATA/recovery.done $PGDATA
root@192.168.26.26's password:
recovery.done 100% 317 312.7KB/s 00:00
[xdb@localhost testdb]$ mv recovery.done recovery.conf
[xdb@localhost testdb]$ vim recovery.conf
[xdb@localhost testdb]$ cat recovery.conf
standby_mode = 'on'
primary_conninfo = 'host=192.168.26.26 port=5432 user=replicator password=replicator application_name=standby_25'
restore_command = 'cp /data/archivelog/%f %p'
archive_cleanup_command = 'pg_archivecleanup /data/archivelog %r'
[xdb@localhost testdb]$
重啟原主庫
新Master節點
日志提示有誤,搭建出現問題
2019-03-27 16:22:19.800 CST,"replicator","",2360,"192.168.26.25:32974",5c9b32bb.938,1,"idle",2019-03-27 16:22:19 CST,4/0,0,ERROR,XX000,"requested starting point 0/71000000 on timeline 16 is not in this server's history","This server's history forked from timeline 16 at 0/6ED4FDA8.",,,,,,,,"standby_25"
2019-03-27 16:22:24.813 CST,"replicator","",2361,"192.168.26.25:32976",5c9b32c0.939,1,"idle",2019-03-27 16:22:24 CST,4/0,0,ERROR,XX000,"requested starting point 0/71000000 on timeline 16 is not in this server's history","This server's history forked from timeline 16 at 0/6ED4FDA8.",,,,,,,,"standby_25"
作為失敗的案例,供參考.
參考資料
神奇的pg_rewind
免責聲明：本站發布的內容（圖片、視頻和文字）以原創、轉載和分享為主，文章觀點不代表本網站立場，如果涉及侵權請聯系站長郵箱：is@yisu.com進行舉報，并提供相關證據，一經查實，將立刻刪除涉嫌侵權內容。
