溫馨提示×
您好，登錄后才能下訂單哦！
點擊 登錄注冊 即表示同意《億速云用戶服務條款》
您好，登錄后才能下訂單哦！
下文主要給大家帶來MySQL-Cluster-7.4 安裝centos 6.9 64bit具體方法，希望這些內容能夠帶給大家實際用處，這也是我編輯MySQL-Cluster-7.4 安裝centos 6.9 64bit具體方法這篇文章的主要目的。好了，廢話不多說，大家直接看下文吧。
一、安裝要求
1、安裝環境：
系統環境：CentOS release 6.9 64bit
軟件名稱：MySQL-Cluster-server-gpl-7.4.15-1.el6.x86_64.rpm，MySQL-Cluster-client-gpl-7.4.15-1.el6.x86_64.rpm
軟件安裝位置：/usr/bin/mysql
數據存放位置：/var/lib/mysql
日志存放位置：/var/log/mysql
二、集群設計
首先設計集群的安裝分配方式，共需要5臺云服務器，云服務器分配如下：
管理節點： 192.168.99.35
數據節點1： 192.168.99.36
數據節點2： 192.168.99.37
sql節點1： 192.168.99.38
sql節點2： 192.168.99.39
注意：目前這種設計存在的問題是管理節點是單點的。
三、安裝部署
1、在五臺云服務器上/home創建mysql目錄，下載如下兩個軟件包，建議下載后直接scp過去
[root@centos-6 ~]# mkdir /home/mysql
[root@centos-6 ~]# cd /home/mysql/
[root@centos-6 mysql]#wget http://mirrors.sohu.com/mysql/MySQL-Cluster-7.4/MySQL-Cluster-server-gpl-7.4.15-1.el6.x86_64.rpm
[root@centos-6 mysql]#wget http://mirrors.sohu.com/mysql/MySQL-Cluster-7.4/MySQL-Cluster-client-gpl-7.4.15-1.el6.x86_64.rpm
2、清除五臺云服務器上的舊版本mysql
查詢遺留了哪些mysql
rpm -qa | grep mysql
通過yum方式清除mysql
yum -y remove mysql*
查詢清除是否完成
rpm -qa | grep mysql
3、在五臺云服務器上安裝MySQL-Cluster-server-gpl-7.4.15-1.el6.x86_64及MySQL-Cluster-client-gpl-7.4.15-1.el6.x86_64
yum -y install MySQL-Cluster-server-gpl-7.4.15-1.el6.x86_64.rpm MySQL-Cluster-client-gpl-7.4.15-1.el6.x86_64.rpm
備注：整個cluster安裝后的初次超級賬戶密碼存在/root/.mysql_secret這個文件當中
4、創建文件夾及進行授權
管理節點創建文件夾并授權
mkdir /var/lib/mysql-cluster /var/run/mysqld/
chown mysql.mysql -R /var/lib/mysql-cluster /var/run/mysqld/
數據節點創建文件夾并授權：
mkdir /var/run/mysqld
chown mysql.mysql -R /var/lib/mysql /var/run/mysqld/
SQL節點創建文件夾并授權
mkdir /var/run/mysqld
chown mysql.mysql -R /var/lib/mysql /var/run/mysqld/
5、配置管理節點配置文件
vim /var/lib/mysql-cluster/config.ini
[ndbd default]
NoOfReplicas=2 #數據寫入數量。2表示兩份
DataMemory=500M #配置數據存儲可使用的內存
IndexMemory=100M #索引給100M
#manager options: #管理節點
[ndb_mgmd]
id=1
datadir=/var/lib/mysql-cluster #管理節點的日志
HostName=192.168.99.35 #管理節點的IP地址。本機IP
#data node options: #數據存儲節點
[ndbd]
HostName=192.168.99.36
DataDir=/var/lib/mysql #mysql數據存儲路徑
id=2
[ndbd]
HostName=192.168.99.37
DataDir=/var/lib/mysql #mysql數據存儲路徑
id=3
#SQLnode options: #關于SQL節點
[mysqld]
HostName=192.168.99.38
id=4
[mysqld]
HostName=192.168.99.39
id=5
6、配置數據節點配置文件
vim /etc/my.cnf
[mysqld]
datadir=/var/lib/mysql #mysql數據存儲路徑
ndbcluster #啟動ndb引擎
ndb-connectstring=192.168.99.35 # 管理節點IP地址
[mysqld_safe]
log-error=/var/log/mysqld.log
pid-file=/var/run/mysqld/mysqld.pid
[mysql_cluster]
ndb-connectstring=192.168.99.35 #管理節點IP地址
7、配置sql節點配置文件
vim /etc/my.cnf
[mysqld]
ndbcluster #啟動ndb引擎
ndb-connectstring=192.168.99.35 # 管理節點IP地址
[mysqld_safe]
log-error=/var/log/mysqld.log
pid-file=/var/run/mysqld/mysqld.pid
[mysql_cluster]
ndb-connectstring=192.168.99.35 #管理節點IP地址
說明：數據節點和SQL結點配置文件區別 ，就多一行
數據結點有：datadir=/var/lib/mysql #mysql數據存儲路徑。
四、啟動mysql集群
初次啟動命令以及用戶密碼更改調整：（請嚴格按照次序啟動）
先啟動：管理結點服務->數據結點服務->sql結點服務
關閉：關閉管理結點服務，關閉管理結點服務后，nbdb數據結點服務會自動關閉->手動把sql結點服務關了。
執行初次啟動前請先確認 將兩臺機器的防火墻關閉（service iptables stop 或者 設定 防火墻端口可通，兩個端口即通訊端口1186、數據端口3306 )
1、在99.35上啟動管理節點
ndb_mgmd -f/var/lib/mysql-cluster/config.ini # mysql cluster 后臺運行進程
[root@centos-6 mysql-cluster]# ndb_mgmd -f/var/lib/mysql-cluster/config.ini
MySQL Cluster Management Server mysql-5.6.36 ndb-7.4.15
2017-06-05 20:18:55 [MgmtSrvr] INFO -- The default config directory '/usr/mysql-cluster' does not exist. Trying to create it...
2017-06-05 20:18:55 [MgmtSrvr] INFO -- Sucessfully created config directory
2017-06-05 20:18:55 [MgmtSrvr] WARNING -- at line 8: [MGM] id is deprecated, use NodeId instead
2017-06-05 20:18:55 [MgmtSrvr] WARNING -- at line 16: [DB] id is deprecated, use NodeId instead
2017-06-05 20:18:55 [MgmtSrvr] WARNING -- at line 20: [DB] id is deprecated, use NodeId instead
2017-06-05 20:18:55 [MgmtSrvr] WARNING -- at line 25: [API] id is deprecated, use NodeId instead
2017-06-05 20:18:55 [MgmtSrvr] WARNING -- at line 28: [API] id is deprecated, use NodeId instead
2017-06-05 20:18:55 [MgmtSrvr] WARNING -- at line 8: [MGM] id is deprecated, use NodeId instead
2017-06-05 20:18:55 [MgmtSrvr] WARNING -- at line 16: [DB] id is deprecated, use NodeId instead
2017-06-05 20:18:55 [MgmtSrvr] WARNING -- at line 20: [DB] id is deprecated, use NodeId instead
2017-06-05 20:18:55 [MgmtSrvr] WARNING -- at line 25: [API] id is deprecated, use NodeId instead
2017-06-05 20:18:55 [MgmtSrvr] WARNING -- at line 28: [API] id is deprecated, use NodeId instead
查看啟動是否成功
[root@centos-6 mysql-cluster]# netstat -antup | grep 1186
tcp 0 0 0.0.0.0:1186 0.0.0.0:* LISTEN 5075/ndb_mgmd
tcp 0 0 127.0.0.1:47322 127.0.0.1:1186 ESTABLISHED 5075/ndb_mgmd
tcp 0 0 127.0.0.1:1186 127.0.0.1:47322 ESTABLISHED 5075/ndb_mgmd
2、在99.36及99.37上啟動數據節點，第一次啟動記得帶上初始化參數initial
[root@Centos-6-99 mysql]# ndbd --initial
2017-06-05 20:21:28 [ndbd] INFO -- Angel connected to '192.168.99.35:1186'
2017-06-05 20:21:28 [ndbd] INFO -- Angel allocated nodeid: 2
[root@Centos-6-99 mysql]#
[root@Centos-6-99 mysql]# ndbd --initial
2017-06-05 20:21:47 [ndbd] INFO -- Angel connected to '192.168.99.35:1186'
2017-06-05 20:21:47 [ndbd] INFO -- Angel allocated nodeid: 3
[root@Centos-6-99 mysql]#
3、在99.38及99.39上啟動sql節點
[root@localhost mysql]# 170605 20:23:23 mysqld_safe Logging to '/var/log/mysqld.log'.
170605 20:23:23 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql
[root@localhost mysql]# 170605 20:23:32 mysqld_safe Logging to '/var/log/mysqld.log'.
170605 20:23:32 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql
4、在99.35上登錄管理節點查看集群狀態
[root@centos-6 mysql-cluster]# ndb_mgm
-- NDB Cluster -- Management Client --
ndb_mgm> show
Connected to Management Server at: localhost:1186
Cluster Configuration
---------------------
[ndbd(NDB)] 2 node(s)
id=2 @192.168.99.36 (mysql-5.6.36 ndb-7.4.15, Nodegroup: 0, *)
id=3 @192.168.99.37 (mysql-5.6.36 ndb-7.4.15, Nodegroup: 0)
[ndb_mgmd(MGM)] 1 node(s)
id=1 @192.168.99.35 (mysql-5.6.36 ndb-7.4.15)
[mysqld(API)] 2 node(s)
id=4 @192.168.99.38 (mysql-5.6.36 ndb-7.4.15)
id=5 @192.168.99.39 (mysql-5.6.36 ndb-7.4.15)
ndb_mgm>
5、在99.38及99.39sql節點添加mysql用戶
[root@localhost mysql]# cat /root/.mysql_secret
# The random password set for the root user at Mon Jun 5 19:55:57 2017 (local time): MsIBXVtxWT4He5JF
[root@localhost mysql]# mysql -u root -pMsIBXVtxWT4He5JF
Warning: Using a password on the command line interface can be insecure.
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 2
Server version: 5.6.36-ndb-7.4.15-cluster-gpl
Copyright (c) 2000, 2017, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> show databases;
ERROR 1820 (HY000): You must SET PASSWORD before executing this statement
mysql> set password for 'root'@'localhost'=password('123456');
Query OK, 0 rows affected (0.00 sec)
mysql> quit
Bye
[root@localhost mysql]# mysql -u root -p123456
Warning: Using a password on the command line interface can be insecure.
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 3
Server version: 5.6.36-ndb-7.4.15-cluster-gpl MySQL Cluster Community Server (GPL)
Copyright (c) 2000, 2017, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> grant all privileges on *.* to cluster@"%" identified by "123456";
Query OK, 0 rows affected (0.00 sec)
mysql> flush privileges;
Query OK, 0 rows affected (0.01 sec)
mysql>
6、外部鏈接99.38sql節點進行創建數據庫及數據表測試
mysql -ucluster -p123456 -h213.106.99.38
mysql> create database db;
mysql> use db;
mysql> create table test(id int) engine=ndb;
mysql> insert into test values(10);
mysql> insert into test values(11);
mysql> select * from test;
+------+
| id |
+------+
| 11 |
| 10 |
+------+
2 rows in set (0.00 sec)
mysql>
7、外部鏈接登錄99.39進行查看及插入數據測試
mysql -ucluster -p123456 -h213.106.99.39
mysql> show databases;
mysql> use db;
mysql> insert into test values(12);
Query OK, 1 row affected (0.01 sec)
mysql> insert into test values(13);
Query OK, 1 row affected (0.00 sec)
mysql> select * from test;
+------+
| id |
+------+
| 10 |
| 12 |
| 13 |
| 11 |
+------+
4 rows in set (0.01 sec)
mysql>
五、關閉mysql集群
關閉mysql集群順序： 關閉管理節點服務-》 關閉管理節點時，數據結點服務自動關閉 –》 需要手動關閉SQL結點服務
1、關閉管理節點
ndb_mgm
ndb_mgm> shutdown
Node 2: Cluster shutdown initiated
Node 3: Cluster shutdown initiated
Node 2: Node shutdown completed.
Node 3: Node shutdown completed.
3 NDB Cluster node(s) have shutdown.
Disconnecting to allow management server to shutdown.
查看管理節點是否已關閉
[root@centos-6 mysql-cluster]# ps -axu | grep ndbd
Warning: bad syntax, perhaps a bogus '-'? See /usr/share/doc/procps-3.2.8/FAQ
root 5127 0.0 0.0 103328 876 pts/0 S+ 20:44 0:00 grep ndbd
[root@centos-6 mysql-cluster]#
查看數據節點是否關閉
[root@Centos-6-99 mysql]# ps -axu | grep ndbd
Warning: bad syntax, perhaps a bogus '-'? See /usr/share/doc/procps-3.2.8/FAQ
root 2243 0.0 0.0 103328 872 pts/0 S+ 21:09 0:00 grep ndbd
[root@Centos-6-99 mysql]#
2、手動關閉sql節點
[root@localhost mysql]# mysqladmin -uroot -p123456 shutdown
Warning: Using a password on the command line interface can be insecure.
170605 20:45:02 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended
[1]+ Done mysqld_safe --defaults-file=/etc/my.cnf
或方法二采用暴力kill方式關閉
ps -axu |grep mysql
kill -9
kill -9
ps -axu |grep mysql
六、再次啟動mysql集群進行故障切換測試
1、啟動管理節點
[root@centos-6 mysql-cluster]# ndb_mgm
-- NDB Cluster -- Management Client --
ndb_mgm> show
Connected to Management Server at: localhost:1186
Cluster Configuration
---------------------
[ndbd(NDB)] 2 node(s)
id=2 (not connected, accepting connect from 192.168.99.36)
id=3 (not connected, accepting connect from 192.168.99.37)
[ndb_mgmd(MGM)] 1 node(s)
id=1 @192.168.99.35 (mysql-5.6.36 ndb-7.4.15)
[mysqld(API)] 2 node(s)
id=4 (not connected, accepting connect from 192.168.99.38)
id=5 (not connected, accepting connect from 192.168.99.39)
2、啟動數據節點
[root@Centos-6-99 mysql]# ndbd
2017-06-05 20:47:25 [ndbd] INFO -- Angel connected to '192.168.99.35:1186'
2017-06-05 20:47:25 [ndbd] INFO -- Angel allocated nodeid: 2
[root@Centos-6-99 mysql]#
[root@Centos-6-99 mysql]# ndbd
2017-06-05 20:47:28 [ndbd] INFO -- Angel connected to '192.168.99.35:1186'
2017-06-05 20:47:28 [ndbd] INFO -- Angel allocated nodeid: 3
[root@Centos-6-99 mysql]#
注意：非初始化啟動記得不要加initial參數
3、啟動sql節點
[root@localhost mysql]# mysqld_safe --defaults-file=/etc/my.cnf &
[1] 2014
[root@localhost mysql]# 170605 20:49:49 mysqld_safe Logging to '/var/log/mysqld.log'.
170605 20:49:49 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql
[root@localhost mysql]#
[root@localhost mysql]# mysqld_safe --defaults-file=/etc/my.cnf &
[1] 1740
[root@localhost mysql]# 170605 20:49:57 mysqld_safe Logging to '/var/log/mysqld.log'.
170605 20:49:57 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql
[root@localhost mysql]#
4、通過外部云服務器分別登錄兩臺sql節點進行查詢
[coolner@localhost ~]$ mysql -ucluster -p123456 -h213.106.99.38
mysql> use db;
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A
Database changed
mysql> select * from test;
+------+
| id |
+------+
| 12 |
| 13 |
| 11 |
| 10 |
+------+
4 rows in set (0.00 sec)
mysql>
[coolner@localhost ~]$ mysql -ucluster -p123456 -h213.106.99.39
mysql> use db;
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A
Database changed
mysql> select * from test;
+------+
| id |
+------+
| 12 |
| 13 |
| 11 |
| 10 |
+------+
4 rows in set (0.00 sec)
mysql>
5、模擬數據節點99.36故障，在管理節點查詢集群狀態并在兩臺sql節點進行查詢
[root@Centos-6-99 mysql]# ps -aux | grep ndbd
Warning: bad syntax, perhaps a bogus '-'? See /usr/share/doc/procps-3.2.8/FAQ
root 2141 0.0 0.0 27292 2640 ? Ss 20:47 0:00 ndbd
root 2142 1.0 27.5 3155544 1082592 ? Sl 20:47 0:04 ndbd
root 2187 0.0 0.0 103328 876 pts/0 S+ 20:54 0:00 grep ndbd
[root@Centos-6-99 mysql]# kill -9 2141
[root@Centos-6-99 mysql]# kill -9 2142
在管理節點查看可以看到99.36這臺數據節點斷開了鏈接
ndb_mgm> show
Cluster Configuration
---------------------
[ndbd(NDB)] 2 node(s)
id=2 (not connected, accepting connect from 192.168.99.36)
id=3 @192.168.99.37 (mysql-5.6.36 ndb-7.4.15, Nodegroup: 0, *)
[ndb_mgmd(MGM)] 1 node(s)
id=1 @192.168.99.35 (mysql-5.6.36 ndb-7.4.15)
[mysqld(API)] 2 node(s)
id=4 @192.168.99.38 (mysql-5.6.36 ndb-7.4.15)
id=5 @192.168.99.39 (mysql-5.6.36 ndb-7.4.15)
ndb_mgm>
sql節點查詢顯示正常
[coolner@localhost ~]$ mysql -ucluster -p123456 -h213.106.99.38
mysql> use db;
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A
Database changed
mysql> select * from test;
+------+
| id |
+------+
| 12 |
| 13 |
| 11 |
| 10 |
+------+
4 rows in set (0.00 sec)
[coolner@localhost ~]$ mysql -ucluster -p123456 -h213.106.99.39
mysql> use db;
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A
Database changed
mysql> select * from test;
+------+
| id |
+------+
| 12 |
| 13 |
| 11 |
| 10 |
+------+
4 rows in set (0.00 sec)
mysql>
6、重新啟動數據節點99.36，并在管理節點查看狀態
[root@Centos-6-99 mysql]# ndbd
2017-06-05 20:58:05 [ndbd] INFO -- Angel connected to '192.168.99.35:1186'
2017-06-05 20:58:05 [ndbd] INFO -- Angel allocated nodeid: 2
[root@Centos-6-99 mysql]#
ndb_mgm> show
Cluster Configuration
---------------------
[ndbd(NDB)] 2 node(s)
id=2 @192.168.99.36 (mysql-5.6.36 ndb-7.4.15, starting, Nodegroup: 0) #顯示在初始化狀態
id=3 @192.168.99.37 (mysql-5.6.36 ndb-7.4.15, Nodegroup: 0, *)
[ndb_mgmd(MGM)] 1 node(s)
id=1 @192.168.99.35 (mysql-5.6.36 ndb-7.4.15)
[mysqld(API)] 2 node(s)
id=4 @192.168.99.38 (mysql-5.6.36 ndb-7.4.15)
id=5 @192.168.99.39 (mysql-5.6.36 ndb-7.4.15)
已完成初始化的狀態
ndb_mgm> show
Cluster Configuration
---------------------
[ndbd(NDB)] 2 node(s)
id=2 @192.168.99.36 (mysql-5.6.36 ndb-7.4.15, Nodegroup: 0)
id=3 @192.168.99.37 (mysql-5.6.36 ndb-7.4.15, Nodegroup: 0, *)
[ndb_mgmd(MGM)] 1 node(s)
id=1 @192.168.99.35 (mysql-5.6.36 ndb-7.4.15)
[mysqld(API)] 2 node(s)
id=4 @192.168.99.38 (mysql-5.6.36 ndb-7.4.15)
id=5 @192.168.99.39 (mysql-5.6.36 ndb-7.4.15)
ndb_mgm>
7、模擬sql節點99.38故障，在管理節點查詢集群狀態并在99.39sql節點進行查詢
在99.38關閉sql節點
[root@localhost mysql]# mysqladmin -uroot -p123456 shutdown
Warning: Using a password on the command line interface can be insecure.
170605 21:01:02 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended
[1]+ Done mysqld_safe --defaults-file=/etc/my.cnf
[root@localhost mysql]#
在管理節點查看集群狀態，顯示99.38sql節點斷開鏈接
ndb_mgm> show
Cluster Configuration
---------------------
[ndbd(NDB)] 2 node(s)
id=2 @192.168.99.36 (mysql-5.6.36 ndb-7.4.15, Nodegroup: 0)
id=3 @192.168.99.37 (mysql-5.6.36 ndb-7.4.15, Nodegroup: 0, *)
[ndb_mgmd(MGM)] 1 node(s)
id=1 @192.168.99.35 (mysql-5.6.36 ndb-7.4.15)
[mysqld(API)] 2 node(s)
id=4 (not connected, accepting connect from 192.168.99.38)
id=5 @192.168.99.39 (mysql-5.6.36 ndb-7.4.15)
ndb_mgm>
遠程登錄99.39節點查詢
[coolner@localhost ~]$ mysql -ucluster -p123456 -h292.168.99.39
mysql> use db;
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A
Database changed
mysql> select * from test;
+------+
| id |
+------+
| 10 |
| 12 |
| 13 |
| 11 |
+------+
4 rows in set (0.00 sec)
mysql>
對于以上關于MySQL-Cluster-7.4 安裝centos 6.9 64bit具體方法，大家是不是覺得非常有幫助。如果需要了解更多內容，請繼續關注我們的行業資訊，相信你會喜歡上這些內容的。
免責聲明：本站發布的內容（圖片、視頻和文字）以原創、轉載和分享為主，文章觀點不代表本網站立場，如果涉及侵權請聯系站長郵箱：is@yisu.com進行舉報，并提供相關證據，一經查實，將立刻刪除涉嫌侵權內容。
