centos7中如何配置keepalived日志為別的路徑

這篇文章主要介紹了centos7中如何配置keepalived日志為別的路徑，具有一定借鑒價值，感興趣的朋友可以參考下，希望大家閱讀完這篇文章之后大有收獲，下面讓小編帶著大家一起了解一下。

keepalived 安裝：

cd <keepalived_sourcecode_path>
./configure --prefix=/usr/local/keepalived
 
make && make install
 
mkdir /etc/keepalived
mkdir /etc/keepalived/scripts
cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/
cp /root/keepalived-2.0.6/keepalived/etc/init.d/keepalived /etc/init.d/
cp /usr/local/keepalived/sbin/keepalived /sbin/keepalived
cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/
chmod +x /etc/init.d/keepalived

由于在默認狀態下keepalived的日志會寫入到/var/log/message中，我們需要將此剝離出來。

在centos 6下可以：

（1）首先修改/etc/sysconfig/keepalived文件，注釋掉如下，添加如下： 

#KEEPALIVED_OPTIONS="-D"
KEEPALIVED_OPTIONS="-D -d -S 0"

（2）其次修改 /etc/rsyslog.conf 文件，添加如下：

local0.* /var/log/keepalived.log

在centos 7 下，還需要修改/lib/systemd/system/keepalived.service 文件：

centos 7使用。因為centos 7使用systemctl，通過systemctl調用service，所以需要修改/lib/systemd/system/keepalived.service文件。

將里面的：

EnvironmentFile=-/usr/local/keepalived/etc/sysconfig/keepalived
ExecStart=/usr/local/keepalived/sbin/keepalived $KEEPALIVED_OPTIONS

修改成：

EnvironmentFile=/etc/sysconfig/keepalived
ExecStart=/sbin/keepalived $KEEPALIVED_OPTIONS

然后重新加載service：

systemctl daemon-reload

整體的思路就是，

1. 通過systemctl start keepalived去啟動；

2. 啟動keepalived的時候，會去讀service的配置文件：/lib/systemd/system/keepalived.service；

3. 在service的配置文件時：

3.1 啟動文件路徑ExecStart=/sbin/keepalived $KEEPALIVED_OPTIONS，即啟動方式是帶環境變量文件中參數來啟動；

3.2 讀取環境變量參數EnvironmentFile=/etc/sysconfig/keepalived。

4. $KEEPALIVED_OPTIONS參數是在/etc/sysconfig/keepalived的配置；我們配置的是KEEPALIVED_OPTIONS="-D -d -S 0"；而-S是syslog的facility，0表示放在local0，在/etc/rsyslog.conf 中配置local0.* /var/log/keepalived.log

5. 所以，寫日志就去/var/log/keepalived.log了。

感謝你能夠認真閱讀完這篇文章，希望小編分享的“centos7中如何配置keepalived日志為別的路徑”這篇文章對大家有幫助，同時也希望大家多多支持億速云，關注億速云行業資訊頻道，更多相關知識等著你來學習!