centos中lvs安裝和配置方法

這篇文章主要講解了“centos中lvs安裝和配置方法”，文中的講解內容簡單清晰，易于學習與理解，下面請大家跟著小編的思路慢慢深入，一起來研究和學習“centos中lvs安裝和配置方法”吧！

一、lvs-nat模式

網絡配置：

代碼如下:

lvs-server eth0 ：host-only adapter 192.168.56.101
lvs-server eth2 ：Internal 192.168.0.1
real-server-1 eth0：Internal 192.168.0.2
real-server-2 eth0：Internal 192.168.0.3

 
lvs-server：
1、安裝ipvsadm軟件

代碼如下:

yum -y install ipvsadm*
echo 1 > /proc/sys/net/ipv4/ip_forward 路由器功能，ip轉發
ipvsadm -C
ipvsadm -At 192.168.56.101:80 -s rr 輪叫模式
ipvsadm -at 192.168.56.101:80 -r 192.168.0.2 -m
ipvsadm -at 192.168.56.101:80 -r 192.168.0.3 -m
ipvsadm -L -n

2、real-server-1：

代碼如下:

ifconfig eth0 192.168.0.2 netmask 255.255.255.0
route add default gw 192.168.0.1

3、real-server-2

代碼如下:

ifconfig eth0 192.168.0.3 netmask 255.255.255.0
route add default gw 192.168.0.1
route -n 查看路由表

 
二、lvs-ipturn

網絡配置：

代碼如下:

lvs-server eth0：host-only adapter 192.168.56.101
real-server-1 eth0：host-only adapter 192.168.56.102
real-server-2 eth0：host-only adapter 192.168.56.103

lvs-server：
配置虛擬ip即vip

代碼如下:

ifconfig tunl0 192.168.56.10 netmask 255.255.255.255 up
route add -host 192.168.56.10 dev tunl0</p> <p>ivsadm -C
ipvsadm -At 192.168.56.10:80 -s rr
ipvsadm -at 192.168.56.10:80 -r 192.168.56.102 -i
ipvsadm -at 192.168.56.10:80 -r 192.168.56.103 -i
ipvsadm -L -n

real-server-1：

代碼如下:

ifconfig tunl0 192.168.56.10 netmask 255.255.255.255 up
route add -host 192.168.56.10 dev tunl0
echo 1 > /proc/sys/net/ipv4/conf/tunl0/arp_ignore
echo 2 > /proc/sys/net/ipv4/conf/tunl0/arp_announce
echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore
echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce

real-server-2：

代碼如下:

ifconfig tunl0 192.168.56.10 netmask 255.255.255.255 up
route add -host 192.168.56.10 dev tunl0
echo 1 > /proc/sys/net/ipv4/conf/tunl0/arp_ignore
echo 2 > /proc/sys/net/ipv4/conf/tunl0/arp_announce
echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore
echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce

 
三、lvs-dr

網絡配置：

代碼如下:

lvs-server eth0：host-only adapter 192.168.56.101</p> <p>real-server-1 eth0：host-only adapter 192.168.56.102</p> <p>real-server-2 eth0：host-only adapter 192.168.56.103</p> <p>lvs-server：</p> <p>ifconfig eth0:0 192.168.56.10 netmask 255.255.255.255</p> <p>route add -host 192.168.56.10 dev eth0:0

ipvs:

代碼如下:

ipvsadm -C ipvsadm -At 192.168.56.10:80 -s rr ipvsadm -at 192.168.56.10:80 -r 192.168.56.102 -g ipvsadm -at 192.168.56.10:80 -r 192.168.56.103 -g ipvsadm -L -n</p> <p>real-server-1： ifconfig lo:0 192.168.56.10 netmask 255.255.255.255 route add -host 192.168.56.10 dev lo:0 echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce</p> <p>real-server-2： ifconfig lo:0 192.168.56.10 netmask 255.255.255.255 route add -host 192.168.56.10 dev lo:0 echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce

感謝各位的閱讀，以上就是“centos中lvs安裝和配置方法”的內容了，經過本文的學習后，相信大家對centos中lvs安裝和配置方法這一問題有了更深刻的體會，具體使用情況還需要大家實踐驗證。這里是億速云，小編將為大家推送更多相關知識點的文章，歡迎關注！