【MySQL】【高可用】基于MHA架構的MySQL高可用故障自動切換架構

基于MHA架構的MySQL高可用切換架構

環境：

? CentOS7+MySQL 5.7 + GTID 業務系統：mainBusiness

? node1 : 192.168.1.109 port:3109

? node2 : 192.168.1.110 port:3110

? VIP :192.168.1.88

? manager:192.168.1.8

1.背景：

? 除了galera cluster(Mariadb Cluster,GroupReplication,PXC)和KeepAlived之外，業界廣泛使用的MySQL高可用就是MHA架構了。

? MHA作者在離開DeNA加入facebook后就極少更新了這個工具了。

2.安裝：

? rpm包安裝的方式最簡單，但是作者在27天前增加了對從庫上啟用了super-read-only參數的優化，簡而言之就是：當開啟這個參數后，有可能會發生配置文件中的用戶無法對差異事務進行應用的問題。于是增加了判斷super-read-only參數是否開啟的邏輯判斷，若開啟，則先關閉此參數，然后進行應用差異事務然后重新開啟。

? 所以這里我們采用編譯Github上最新的代碼的辦法進行安裝。地址為：

? https://github.com/yoshinorim/mha4mysql-manager

? https://github.com/yoshinorim/mha4mysql-node

在node1和node2上：

#創建工作文件夾
mkdir -p /data/mha/
#下載源碼包
wget  https://codeload.github.com/yoshinorim/mha4mysql-node/zip/master -O /usr/local/src/mha-node.zip
wget https://codeload.github.com/yoshinorim/mha4mysql-manager/zip/master -O /usr/local/src/mha-manager.zip
#解壓
unzip /usr/local/src/mha-manager.zip -d /usr/local/src
unzip /usr/local/src/mha-node.zip -d /usr/local/src
#安裝perl及其相關依賴
yum -y install perl perl-ExtUtils-MakeMaker perl-ExtUtils-CBuilder perl-Parallel-ForkManager  perl-Config-Tiny 
yum -y install 'perl(inc::Module::Install)'
yum -y install 'perl(Test::Without::Module)'
yum -y install 'perl(Log::Dispatch)'
#編譯管理端
cd /usr/local/src/mha4mysql-manager-master/
perl Makefile.PL #提示時輸入y
make &&make install
#編譯節點端
cd /usr/local/src/mha4mysql-node-master/
perl Makefile.PL 
make &&make install
#更改配置文件
cp /usr/
#在數據庫中創建用于MHA系統工作的管理員權限賬號
#node1
mysql --login-path=3109 -e 'create user mha@'192.168.1.8' identified by 'sa123456''
mysql --login-path=3109 -e 'grant all privileges on *.* to mha@'192.168.1.8''
mysql --login-path=3109 -e 'flush privilges'
#node2
mysql --login-path=3110 -e 'create user mha@'192.168.1.8' identified by 'sa123456''
mysql --login-path=3110 -e 'grant all privileges on *.* to mha@'192.168.1.8''
mysql --login-path=3110 -e 'flush privilges'

在manager上

#創建工作目錄
mkdir -p /data/mha/mainBusiness
#下載源碼包
wget  https://codeload.github.com/yoshinorim/mha4mysql-node/zip/master -O /usr/local/src/mha-node.zip
wget https://codeload.github.com/yoshinorim/mha4mysql-manager/zip/master -O /usr/local/src/mha-manager.zip
#解壓
unzip /usr/local/src/mha-manager.zip -d /usr/local/src
unzip /usr/local/src/mha-node.zip -d /usr/local/src
#安裝perl及其相關依賴
yum -y install perl perl-ExtUtils-MakeMaker perl-ExtUtils-CBuilder perl-Parallel-ForkManager  perl-Config-Tiny 
yum -y install 'perl(inc::Module::Install)'
yum -y install 'perl(Test::Without::Module)'
yum -y install 'perl(Log::Dispatch)'
#編譯管理端
cd /usr/local/src/mha4mysql-manager-master/
perl Makefile.PL #提示時輸入y
make &&make install
#編譯節點端
cd /usr/local/src/mha4mysql-node-master/
perl Makefile.PL 
make &&make install
#創建配置文件
cp /usr/local/src/mha4mysql-manager-master/samples/conf/* /etc/mha
mv /etc/mha/app1.cnf /etc/mha/mainBusiness.cnf

配置文件內容：

manager_workdir=/data/mha/mainBusiness                 #設置MHA的工作目錄
manager_log=/data/mha/mainBusiness/manager.log         #MHA manager的日志輸出
remote_workdir=/data/mha/                              #預設MHA node端的工作目錄

master_binlog_dir= /data/mysql/3109/log/,/data/mysql/3110/log/  #預設MHA node端的binlog目錄                                                                                       
#secondary_check_script= masterha_secondary_check -s 192.168.1.109 -s 192.168.1.110                                                                    
master_ip_failover_script= /etc/mha/master_ip_failover              #故障時VIP更改
master_ip_online_change_script= /etc/mha/master_ip_online_change    #在線切換時VIP更改
report_script= /etc/mha/send_report    #報警腳本
ping_interval=1                                       #設置MHA manager的檢測間隔（1秒）

[server1]
hostname=192.168.1.109
port=3109
ssh_user=root
ssh_port=22
candidate_master=1                                    #設置該節點是否可以提升為主，1為是,0否
check_repl_delay=0                                    #發生故障后是否檢查本實例主從落后程度,0否,1是

[server2]
hostname=192.168.1.110
port=3110
ssh_user=root
ssh_port=22
candidate_master=1                                    #設置該節點是否可以提升為主，1為是,0否
check_repl_delay=0                                    #發生故障后是否檢查本實例主從落后程度,0否,1是

報警腳本修改：

vim /etc/mha/send_report
#!/usr/bin/perl

use strict;
use warnings FATAL => 'all';
use Mail::Sender;
use Getopt::Long;

#new_master_host and new_slave_hosts are set only when recovering master succeeded
my ( $dead_master_host, $new_master_host, $new_slave_hosts, $subject, $body );
my $smtp='smtp.mxhichina.com';
my $mail_from='zabbix@xxx.com';
my $mail_user='zabbix@xxx.com';
my $mail_pass='123456';
my $mail_to=['psyduck007@outlook.com'];
GetOptions(
  'orig_master_host=s' => \$dead_master_host,
  'new_master_host=s'  => \$new_master_host,
  'new_slave_hosts=s'  => \$new_slave_hosts,
  'subject=s'          => \$subject,
  'body=s'             => \$body,
);

# Do whatever you want here
mailToContacts($smtp,$mail_from,$mail_user,$mail_pass,$mail_to,$subject,$body);

sub mailToContacts {
    my ( $smtp, $mail_from, $user, $passwd, $mail_to, $subject, $msg ) = @_;
    open my $DEBUG, "> /tmp/monitormail.log"
       or die "Can't open the debug      file:$!\n";
    my $sender = new Mail::Sender {
        ctype       => 'text/plain; charset=utf-8',
        encoding    => 'utf-8',
        smtp        => $smtp,
        from        => $mail_from,
        auth        => 'LOGIN',
        TLS_allowed => '0',
        authid      => $user,
        authpwd     => $passwd,
        to          => $mail_to,
        subject     => $subject,
        debug       => $DEBUG
    };

    $sender->MailMsg(
        {   msg   => $msg,
            debug => $DEBUG
        }
    ) or print $Mail::Sender::Error;
    return 1;
}

增加定時清理relay log的腳本：

cat >/etc/auto_clean_relay_log.sh<<EOF
#!/bin/sh
USER=proxysql
PASSWORD=123456
PORT=3110
log_dir='/data/mha'
work_dir='/data/mha'
purge='/usr/local/bin/purge_relay_logs'
if [ ! -d $log_dir ]
then
   mkdir $log_dir -p
fi
$purge --user=$user --password=$passwd --disable_relay_log_purge --port=$port  >> $log_dir/purge_relay_logs.log 2>&1

crontab -e

0 0 */3 * * sh /etc/auto_clean_relay_log.sh

修改故障切換VIP腳本：

vim /etc/mha/master_ip_failover
#!/usr/bin/env perl

use strict;
use warnings FATAL => 'all';

use Getopt::Long;
use MHA::DBHelper;
#自定義該組機器的vip
my $vip = "192.168.1.100";
my $if = "eth0";
my (
  $command,        $ssh_user,         $orig_master_host,
  $orig_master_ip, $orig_master_port, $new_master_host,
  $new_master_ip,  $new_master_port,  $new_master_user,
  $new_master_password
);

GetOptions(
  'command=s'             => \$command,
  'ssh_user=s'            => \$ssh_user,
  'orig_master_host=s'    => \$orig_master_host,
  'orig_master_ip=s'      => \$orig_master_ip,
  'orig_master_port=i'    => \$orig_master_port,
  'new_master_host=s'     => \$new_master_host,
  'new_master_ip=s'       => \$new_master_ip,
  'new_master_port=i'     => \$new_master_port,
  'new_master_user=s'     => \$new_master_user,
  'new_master_password=s' => \$new_master_password,
);

sub add_vip {
    my $output1 = `ssh -o ConnectTimeout=15  -o ConnectionAttempts=3 $orig_master_host /sbin/ip addr del $vip/32 dev $if`;
    my $output2 = `ssh -o ConnectTimeout=15  -o ConnectionAttempts=3 $new_master_host /sbin/ip addr add $vip/32 dev $if`;

}
exit &main();

sub main {
  if ( $command eq "stop" || $command eq "stopssh" ) {

    # $orig_master_host, $orig_master_ip, $orig_master_port are passed.
    # If you manage master ip address at global catalog database,
    # invalidate orig_master_ip here.
    my $exit_code = 1;
    eval {

      # updating global catalog, etc
      $exit_code = 0;
    };
    if ($@) {
      warn "Got Error: $@\n";
      exit $exit_code;
    }
    exit $exit_code;
  }
  elsif ( $command eq "start" ) {

    # all arguments are passed.
    # If you manage master ip address at global catalog database,
    # activate new_master_ip here.
    # You can also grant write access (create user, set read_only=0, etc) here.
    my $exit_code = 10;
    eval {
      my $new_master_handler = new MHA::DBHelper();

      # args: hostname, port, user, password, raise_error_or_not
      $new_master_handler->connect( $new_master_ip, $new_master_port,
        $new_master_user, $new_master_password, 1 );

      ## Set read_only=0 on the new master
      $new_master_handler->disable_log_bin_local();
      print "Set read_only=0 on the new master.\n";
      $new_master_handler->disable_read_only();

      ## Creating an app user on the new master
      #print "Creating app user on the new master..\n";
      #FIXME_xxx_create_user( $new_master_handler->{dbh} );
      $new_master_handler->enable_log_bin_local();
      $new_master_handler->disconnect();

      ## Update master ip on the catalog database, etc
      &add_vip();
      $exit_code = 0;
    };
    if ($@) {
      warn $@;

      # If you want to continue failover, exit 10.
      exit $exit_code;
    }
    exit $exit_code;
  }
  elsif ( $command eq "status" ) {

    # do nothing
    exit 0;
  }
  else {
    &usage();
    exit 1;
  }
}

sub usage {
  print
"Usage: master_ip_failover --command=start|stop|stopssh|status --orig_master_host=host --orig_master_ip=ip --orig_master_port=port --new_master_host=host --new_master_ip=ip --new_master_port=port\n";
}

vim /etc/mha/master_ip_online_change

use strict;
use warnings FATAL => 'all';

use Getopt::Long;
use MHA::DBHelper;
use MHA::NodeUtil;
use Time::HiRes qw( sleep gettimeofday tv_interval );
use Data::Dumper;

my $_tstart;
my $_running_interval = 0.1;
#添加vip定義
my $vip = "192.168.1.100";
my $if = "eth0";

my (
  $command,              $orig_master_is_new_slave, $orig_master_host,
  $orig_master_ip,       $orig_master_port,         $orig_master_user,
  $orig_master_password, $orig_master_ssh_user,     $new_master_host,
  $new_master_ip,        $new_master_port,          $new_master_user,
  $new_master_password,  $new_master_ssh_user,
);
GetOptions(
  'command=s'                => \$command,
  'orig_master_is_new_slave' => \$orig_master_is_new_slave,
  'orig_master_host=s'       => \$orig_master_host,
  'orig_master_ip=s'         => \$orig_master_ip,
  'orig_master_port=i'       => \$orig_master_port,
  'orig_master_user=s'       => \$orig_master_user,
  'orig_master_password=s'   => \$orig_master_password,
  'orig_master_ssh_user=s'   => \$orig_master_ssh_user,
  'new_master_host=s'        => \$new_master_host,
  'new_master_ip=s'          => \$new_master_ip,
  'new_master_port=i'        => \$new_master_port,
  'new_master_user=s'        => \$new_master_user,
  'new_master_password=s'    => \$new_master_password,
  'new_master_ssh_user=s'    => \$new_master_ssh_user,
);

exit &main();
sub drop_vip {
        my $output = `ssh -o ConnectTimeout=15  -o ConnectionAttempts=3 $orig_master_host /sbin/ip addr del $vip/32 dev $if`;
    #mysql里的連接全部干掉
    #FIXME
}
sub add_vip {
        my $output = `ssh -o ConnectTimeout=15  -o ConnectionAttempts=3 $new_master_host /sbin/ip addr add $vip/32 dev $if`;

}

sub current_time_us {
  my ( $sec, $microsec ) = gettimeofday();
  my $curdate = localtime($sec);
  return $curdate . " " . sprintf( "%06d", $microsec );
}

sub sleep_until {
  my $elapsed = tv_interval($_tstart);
  if ( $_running_interval > $elapsed ) {
    sleep( $_running_interval - $elapsed );
  }
}

sub get_threads_util {
  my $dbh                    = shift;
  my $my_connection_id       = shift;
  my $running_time_threshold = shift;
  my $type                   = shift;
  $running_time_threshold = 0 unless ($running_time_threshold);
  $type                   = 0 unless ($type);
  my @threads;

  my $sth = $dbh->prepare("SHOW PROCESSLIST");
  $sth->execute();

  while ( my $ref = $sth->fetchrow_hashref() ) {
    my $id         = $ref->{Id};
    my $user       = $ref->{User};
    my $host       = $ref->{Host};
    my $command    = $ref->{Command};
    my $state      = $ref->{State};
    my $query_time = $ref->{Time};
    my $info       = $ref->{Info};
    $info =~ s/^\s*(.*?)\s*$/$1/ if defined($info);
    next if ( $my_connection_id == $id );
    next if ( defined($query_time) && $query_time < $running_time_threshold );
    next if ( defined($command)    && $command eq "Binlog Dump" );
    next if ( defined($user)       && $user eq "system user" );
    next
      if ( defined($command)
      && $command eq "Sleep"
      && defined($query_time)
      && $query_time >= 1 );

    if ( $type >= 1 ) {
      next if ( defined($command) && $command eq "Sleep" );
      next if ( defined($command) && $command eq "Connect" );
    }

    if ( $type >= 2 ) {
      next if ( defined($info) && $info =~ m/^select/i );
      next if ( defined($info) && $info =~ m/^show/i );
    }

    push @threads, $ref;
  }
  return @threads;
}

sub main {
  if ( $command eq "stop" ) {
    ## Gracefully killing connections on the current master
    # 1. Set read_only= 1 on the new master
    # 2. DROP USER so that no app user can establish new connections
    # 3. Set read_only= 1 on the current master
    # 4. Kill current queries
    # * Any database access failure will result in script die.
    my $exit_code = 1;
    eval {
      ## Setting read_only=1 on the new master (to avoid accident)
      my $new_master_handler = new MHA::DBHelper();

      # args: hostname, port, user, password, raise_error(die_on_error)_or_not
      $new_master_handler->connect( $new_master_ip, $new_master_port,
        $new_master_user, $new_master_password, 1 );
      print current_time_us() . " Set read_only on the new master.. ";
      $new_master_handler->enable_read_only();
      if ( $new_master_handler->is_read_only() ) {
        print "ok.\n";
      }
      else {
        die "Failed!\n";
      }
      $new_master_handler->disconnect();

      # Connecting to the orig master, die if any database error happens
      my $orig_master_handler = new MHA::DBHelper();
      $orig_master_handler->connect( $orig_master_ip, $orig_master_port,
        $orig_master_user, $orig_master_password, 1 );

      ## Drop application user so that nobody can connect. Disabling per-session binlog beforehand
      $orig_master_handler->disable_log_bin_local();
     # print current_time_us() . " Drpping app user on the orig master..\n";
      print current_time_us() . " drop vip $vip..\n";
      #drop_app_user($orig_master_handler);
     &drop_vip();

      ## Waiting for N * 100 milliseconds so that current connections can exit
      my $time_until_read_only = 15;
      $_tstart = [gettimeofday];
      my @threads = get_threads_util( $orig_master_handler->{dbh},
        $orig_master_handler->{connection_id} );
      while ( $time_until_read_only > 0 && $#threads >= 0 ) {
        if ( $time_until_read_only % 5 == 0 ) {
          printf
"%s Waiting all running %d threads are disconnected.. (max %d milliseconds)\n",
            current_time_us(), $#threads + 1, $time_until_read_only * 100;
          if ( $#threads < 5 ) {
            print Data::Dumper->new( [$_] )->Indent(0)->Terse(1)->Dump . "\n"
              foreach (@threads);
          }
        }
        sleep_until();
        $_tstart = [gettimeofday];
        $time_until_read_only--;
        @threads = get_threads_util( $orig_master_handler->{dbh},
          $orig_master_handler->{connection_id} );
      }

      ## Setting read_only=1 on the current master so that nobody(except SUPER) can write
      print current_time_us() . " Set read_only=1 on the orig master.. ";
      $orig_master_handler->enable_read_only();
      if ( $orig_master_handler->is_read_only() ) {
        print "ok.\n";
      }
      else {
        die "Failed!\n";
      }

      ## Waiting for M * 100 milliseconds so that current update queries can complete
      my $time_until_kill_threads = 5;
      @threads = get_threads_util( $orig_master_handler->{dbh},
        $orig_master_handler->{connection_id} );
      while ( $time_until_kill_threads > 0 && $#threads >= 0 ) {
        if ( $time_until_kill_threads % 5 == 0 ) {
          printf
"%s Waiting all running %d queries are disconnected.. (max %d milliseconds)\n",
            current_time_us(), $#threads + 1, $time_until_kill_threads * 100;
          if ( $#threads < 5 ) {
            print Data::Dumper->new( [$_] )->Indent(0)->Terse(1)->Dump . "\n"
              foreach (@threads);
          }
        }
        sleep_until();
        $_tstart = [gettimeofday];
        $time_until_kill_threads--;
        @threads = get_threads_util( $orig_master_handler->{dbh},
          $orig_master_handler->{connection_id} );
      }

      ## Terminating all threads
      print current_time_us() . " Killing all application threads..\n";
      $orig_master_handler->kill_threads(@threads) if ( $#threads >= 0 );
      print current_time_us() . " done.\n";
      $orig_master_handler->enable_log_bin_local();
      $orig_master_handler->disconnect();

      ## After finishing the script, MHA executes FLUSH TABLES WITH READ LOCK
      $exit_code = 0;
    };
    if ($@) {
      warn "Got Error: $@\n";
      exit $exit_code;
    }
    exit $exit_code;
  }
  elsif ( $command eq "start" ) {
    ## Activating master ip on the new master
    # 1. Create app user with write privileges
    # 2. Moving backup script if needed
    # 3. Register new master's ip to the catalog database

# We don't return error even though activating updatable accounts/ip failed so that we don't interrupt slaves' recovery.
# If exit code is 0 or 10, MHA does not abort
    my $exit_code = 10;
    eval {
      my $new_master_handler = new MHA::DBHelper();

      # args: hostname, port, user, password, raise_error_or_not
      $new_master_handler->connect( $new_master_ip, $new_master_port,
        $new_master_user, $new_master_password, 1 );

      ## Set read_only=0 on the new master
      $new_master_handler->disable_log_bin_local();
      print current_time_us() . " Set read_only=0 on the new master.\n";
      $new_master_handler->disable_read_only();

      ## Creating an app user on the new master
      #print current_time_us() . " Creating app user on the new master..\n";
      print current_time_us() . "Add vip $vip on $if..\n";
     # create_app_user($new_master_handler);
      &add_vip();
      $new_master_handler->enable_log_bin_local();
      $new_master_handler->disconnect();

      ## Update master ip on the catalog database, etc
      $exit_code = 0;
    };
    if ($@) {
      warn "Got Error: $@\n";
      exit $exit_code;
    }
    exit $exit_code;
  }
  elsif ( $command eq "status" ) {

    # do nothing
    exit 0;
  }
  else {
    &usage();
    exit 1;
  }
}

sub usage {
  print
"Usage: master_ip_online_change --command=start|stop|status --orig_master_host=host --orig_master_ip=ip --orig_master_port=port --new_master_host=host --new_master_ip=ip --new_master_port=port\n";
  die;
}

? 至此：安裝與配置已經完全結束，開始進入運行環節

運行：

masterha_manager --conf=/etc/mha/mainBusiness.cnf &

? 檢查masterha_manager運行情況：

masterha_check_status --conf=/etc/mha/mainBusiness.cnf

故障轉移：

? 我們將主庫關機，進行觀測整個故障轉移的過程

[g:\~]$ Connecting to 192.168.1.110:22...
Could not connect to '192.168.1.110' (port 22): Connection failed.

Type `help' to learn how to use Xshell prompt.

? manager端輸出如下：

Sun Feb  4 12:26:46 2018 - [info] Starting ping health check on 192.168.1.110(192.168.1.110:3110)..
Sun Feb  4 12:26:46 2018 - [info] Ping(SELECT) succeeded, waiting until MySQL doesn't respond..
Sun Feb  4 12:30:41 2018 - [warning] Got error on MySQL select ping: 2006 (MySQL server has gone away)
Sun Feb  4 12:30:41 2018 - [info] Executing SSH check script: exit 0
Sun Feb  4 12:30:41 2018 - [warning] HealthCheck: SSH to 192.168.1.110 is NOT reachable.
Sun Feb  4 12:30:43 2018 - [warning] Got error on MySQL connect: 2003 (Can't connect to MySQL server on '192.168.1.110' (4))
Sun Feb  4 12:30:43 2018 - [warning] Connection failed 2 time(s)..
Sun Feb  4 12:30:44 2018 - [warning] Got error on MySQL connect: 2003 (Can't connect to MySQL server on '192.168.1.110' (4))
Sun Feb  4 12:30:44 2018 - [warning] Connection failed 3 time(s)..
Sun Feb  4 12:30:45 2018 - [warning] Got error on MySQL connect: 2003 (Can't connect to MySQL server on '192.168.1.110' (4))
Sun Feb  4 12:30:45 2018 - [warning] Connection failed 4 time(s)..
Sun Feb  4 12:30:45 2018 - [warning] Master is not reachable from health checker!
Sun Feb  4 12:30:45 2018 - [warning] Master 192.168.1.110(192.168.1.110:3110) is not reachable!
Sun Feb  4 12:30:45 2018 - [warning] SSH is NOT reachable.
Sun Feb  4 12:30:45 2018 - [info] Connecting to a master server failed. Reading configuration file /etc/masterha_default.cnf and /etc/mha/mainBusiness.cnf again, and trying to connect to all servers to check server status..
Sun Feb  4 12:30:45 2018 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping.
Sun Feb  4 12:30:45 2018 - [info] Reading application default configuration from /etc/mha/mainBusiness.cnf..
Sun Feb  4 12:30:45 2018 - [info] Reading server configuration from /etc/mha/mainBusiness.cnf..
Sun Feb  4 12:30:46 2018 - [info] GTID failover mode = 1
Sun Feb  4 12:30:46 2018 - [info] Dead Servers:
Sun Feb  4 12:30:46 2018 - [info]   192.168.1.110(192.168.1.110:3110)
Sun Feb  4 12:30:46 2018 - [info] Alive Servers:
Sun Feb  4 12:30:46 2018 - [info]   192.168.1.109(192.168.1.109:3109)
Sun Feb  4 12:30:46 2018 - [info] Alive Slaves:
Sun Feb  4 12:30:46 2018 - [info]   192.168.1.109(192.168.1.109:3109)  Version=5.7.19-log (oldest major version between slaves) log-bin:enabled
Sun Feb  4 12:30:46 2018 - [info]     GTID ON
Sun Feb  4 12:30:46 2018 - [info]     Replicating from 192.168.1.110(192.168.1.110:3110)
Sun Feb  4 12:30:46 2018 - [info]     Primary candidate for the new Master (candidate_master is set)
Sun Feb  4 12:30:46 2018 - [info] Checking slave configurations..
Sun Feb  4 12:30:46 2018 - [info] Checking replication filtering settings..
Sun Feb  4 12:30:46 2018 - [info]  Replication filtering check ok.
Sun Feb  4 12:30:46 2018 - [info] Master is down!
Sun Feb  4 12:30:46 2018 - [info] Terminating monitoring script.
Sun Feb  4 12:30:46 2018 - [info] Got exit code 20 (Master dead).
Sun Feb  4 12:30:46 2018 - [info] MHA::MasterFailover version 0.57.
Sun Feb  4 12:30:46 2018 - [info] Starting master failover.
Sun Feb  4 12:30:46 2018 - [info] 
Sun Feb  4 12:30:46 2018 - [info] * Phase 1: Configuration Check Phase..
Sun Feb  4 12:30:46 2018 - [info] 
Sun Feb  4 12:30:47 2018 - [info] GTID failover mode = 1
Sun Feb  4 12:30:47 2018 - [info] Dead Servers:
Sun Feb  4 12:30:47 2018 - [info]   192.168.1.110(192.168.1.110:3110)
Sun Feb  4 12:30:47 2018 - [info] Checking master reachability via MySQL(double check)...
Sun Feb  4 12:30:48 2018 - [info]  ok.
Sun Feb  4 12:30:48 2018 - [info] Alive Servers:
Sun Feb  4 12:30:48 2018 - [info]   192.168.1.109(192.168.1.109:3109)
Sun Feb  4 12:30:48 2018 - [info] Alive Slaves:
Sun Feb  4 12:30:48 2018 - [info]   192.168.1.109(192.168.1.109:3109)  Version=5.7.19-log (oldest major version between slaves) log-bin:enabled
Sun Feb  4 12:30:48 2018 - [info]     GTID ON
Sun Feb  4 12:30:48 2018 - [info]     Replicating from 192.168.1.110(192.168.1.110:3110)
Sun Feb  4 12:30:48 2018 - [info]     Primary candidate for the new Master (candidate_master is set)
Sun Feb  4 12:30:48 2018 - [info] Starting GTID based failover.
Sun Feb  4 12:30:48 2018 - [info] 
Sun Feb  4 12:30:48 2018 - [info] ** Phase 1: Configuration Check Phase completed.
Sun Feb  4 12:30:48 2018 - [info] 
Sun Feb  4 12:30:48 2018 - [info] * Phase 2: Dead Master Shutdown Phase..
Sun Feb  4 12:30:48 2018 - [info] 
Sun Feb  4 12:30:48 2018 - [info] Forcing shutdown so that applications never connect to the current master..
Sun Feb  4 12:30:48 2018 - [info] Executing master IP deactivation script:
Sun Feb  4 12:30:48 2018 - [info]   /etc/mha/master_ip_failover --orig_master_host=192.168.1.110 --orig_master_ip=192.168.1.110 --orig_master_port=3110 --command=stop 
Sun Feb  4 12:30:48 2018 - [info]  done.
Sun Feb  4 12:30:48 2018 - [warning] shutdown_script is not set. Skipping explicit shutting down of the dead master.
Sun Feb  4 12:30:48 2018 - [info] * Phase 2: Dead Master Shutdown Phase completed.
Sun Feb  4 12:30:48 2018 - [info] 
Sun Feb  4 12:30:48 2018 - [info] * Phase 3: Master Recovery Phase..
Sun Feb  4 12:30:48 2018 - [info] 
Sun Feb  4 12:30:48 2018 - [info] * Phase 3.1: Getting Latest Slaves Phase..
Sun Feb  4 12:30:48 2018 - [info] 
Sun Feb  4 12:30:48 2018 - [info] The latest binary log file/position on all slaves is 3110binlog.000073:234
Sun Feb  4 12:30:48 2018 - [info] Latest slaves (Slaves that received relay log files to the latest):
Sun Feb  4 12:30:48 2018 - [info]   192.168.1.109(192.168.1.109:3109)  Version=5.7.19-log (oldest major version between slaves) log-bin:enabled
Sun Feb  4 12:30:48 2018 - [info]     GTID ON
Sun Feb  4 12:30:48 2018 - [info]     Replicating from 192.168.1.110(192.168.1.110:3110)
Sun Feb  4 12:30:48 2018 - [info]     Primary candidate for the new Master (candidate_master is set)
Sun Feb  4 12:30:48 2018 - [info] The oldest binary log file/position on all slaves is 3110binlog.000073:234
Sun Feb  4 12:30:48 2018 - [info] Oldest slaves:
Sun Feb  4 12:30:48 2018 - [info]   192.168.1.109(192.168.1.109:3109)  Version=5.7.19-log (oldest major version between slaves) log-bin:enabled
Sun Feb  4 12:30:48 2018 - [info]     GTID ON
Sun Feb  4 12:30:48 2018 - [info]     Replicating from 192.168.1.110(192.168.1.110:3110)
Sun Feb  4 12:30:48 2018 - [info]     Primary candidate for the new Master (candidate_master is set)
Sun Feb  4 12:30:48 2018 - [info] 
Sun Feb  4 12:30:48 2018 - [info] * Phase 3.3: Determining New Master Phase..
Sun Feb  4 12:30:48 2018 - [info] 
Sun Feb  4 12:30:48 2018 - [info] Searching new master from slaves..
Sun Feb  4 12:30:48 2018 - [info]  Candidate masters from the configuration file:
Sun Feb  4 12:30:48 2018 - [info]   192.168.1.109(192.168.1.109:3109)  Version=5.7.19-log (oldest major version between slaves) log-bin:enabled
Sun Feb  4 12:30:48 2018 - [info]     GTID ON
Sun Feb  4 12:30:48 2018 - [info]     Replicating from 192.168.1.110(192.168.1.110:3110)
Sun Feb  4 12:30:48 2018 - [info]     Primary candidate for the new Master (candidate_master is set)
Sun Feb  4 12:30:48 2018 - [info]  Non-candidate masters:
Sun Feb  4 12:30:48 2018 - [info]  Searching from candidate_master slaves which have received the latest relay log events..
Sun Feb  4 12:30:48 2018 - [info] New master is 192.168.1.109(192.168.1.109:3109)
Sun Feb  4 12:30:48 2018 - [info] Starting master failover..
Sun Feb  4 12:30:48 2018 - [info] 
From:
192.168.1.110(192.168.1.110:3110) (current master)
 +--192.168.1.109(192.168.1.109:3109)

To:
192.168.1.109(192.168.1.109:3109) (new master)
Sun Feb  4 12:30:48 2018 - [info] 
Sun Feb  4 12:30:48 2018 - [info] * Phase 3.3: New Master Recovery Phase..
Sun Feb  4 12:30:48 2018 - [info] 
Sun Feb  4 12:30:48 2018 - [info]  Waiting all logs to be applied.. 
Sun Feb  4 12:30:48 2018 - [info]   done.
Sun Feb  4 12:30:48 2018 - [info] Getting new master's binlog name and position..
Sun Feb  4 12:30:48 2018 - [info]  3109binlog.000089:234
Sun Feb  4 12:30:48 2018 - [info]  All other slaves should start replication from here. Statement should be: CHANGE MASTER TO MASTER_HOST='192.168.1.109', MASTER_PORT=3109, MASTER_AUTO_POSITION=1, MASTER_USER='repl', MASTER_PASSWORD='xxx';
Sun Feb  4 12:30:48 2018 - [info] Master Recovery succeeded. File:Pos:Exec_Gtid_Set: 3109binlog.000089, 234, 2285de8a-9bc2-11e7-8a15-000c298e9a6f:1-14,
28ea40ab-9bbd-11e7-8cd1-000c29c31069:1-15308048
Sun Feb  4 12:30:48 2018 - [info] Executing master IP activate script:
Sun Feb  4 12:30:48 2018 - [info]   /etc/mha/master_ip_failover --command=start --ssh_user=root --orig_master_host=192.168.1.110 --orig_master_ip=192.168.1.110 --orig_master_port=3110 --new_master_host=192.168.1.109 --new_master_ip=192.168.1.109 --new_master_port=3109 --new_master_user='mha'   --new_master_password=xxx
Set read_only=0 on the new master.
ssh: connect to host 192.168.1.110 port 22: Connection timed out
Sun Feb  4 12:31:35 2018 - [info]  OK.
Sun Feb  4 12:31:35 2018 - [info] ** Finished master recovery successfully.
Sun Feb  4 12:31:35 2018 - [info] * Phase 3: Master Recovery Phase completed.
Sun Feb  4 12:31:35 2018 - [info] 
Sun Feb  4 12:31:35 2018 - [info] * Phase 4: Slaves Recovery Phase..
Sun Feb  4 12:31:35 2018 - [info] 
Sun Feb  4 12:31:35 2018 - [info] 
Sun Feb  4 12:31:35 2018 - [info] * Phase 4.1: Starting Slaves in parallel..
Sun Feb  4 12:31:35 2018 - [info] 
Sun Feb  4 12:31:35 2018 - [info] All new slave servers recovered successfully.
Sun Feb  4 12:31:35 2018 - [info] 
Sun Feb  4 12:31:35 2018 - [info] * Phase 5: New master cleanup phase..
Sun Feb  4 12:31:35 2018 - [info] 
Sun Feb  4 12:31:35 2018 - [info] Resetting slave info on the new master..
Sun Feb  4 12:31:35 2018 - [info]  192.168.1.109: Resetting slave info succeeded.
Sun Feb  4 12:31:35 2018 - [info] Master failover to 192.168.1.109(192.168.1.109:3109) completed successfully.
Sun Feb  4 12:31:35 2018 - [info] 

----- Failover Report -----

mainBusiness: MySQL Master failover 192.168.1.110(192.168.1.110:3110) to 192.168.1.109(192.168.1.109:3109) succeeded

Master 192.168.1.110(192.168.1.110:3110) is down!

Check MHA Manager logs at Client-Cent7-IP008:/data/mha/mainBusiness/manager.log for details.

Started automated(non-interactive) failover.
Invalidated master IP address on 192.168.1.110(192.168.1.110:3110)
Selected 192.168.1.109(192.168.1.109:3109) as a new master.
192.168.1.109(192.168.1.109:3109): OK: Applying all logs succeeded.
192.168.1.109(192.168.1.109:3109): OK: Activated master IP address.
192.168.1.109(192.168.1.109:3109): Resetting slave info succeeded.
Master failover to 192.168.1.109(192.168.1.109:3109) completed successfully.
Sun Feb  4 12:31:35 2018 - [info] Sending mail..
Option new_slave_hosts requires an argument     #雙節點，沒有多余的從節點，所以會報錯，下面也是。
Unknown option: conf

故障切換解析：

? 1.每秒檢查MySQL，連續4次無法連上MySQL服務后，進入SSH檢查階段，SSH也不通后，確認實例故障。由于故障實例為主庫，觸發切換主庫的操作。

? 2.再次讀取配置文件信息，獲取所有注冊的實例，及其切換偏好。關閉manager節點，啟用切換腳本進行切換操作。切換操作的邏輯與之前的【MySQL】【高可用】purge_relay_logs工具的使用文章中分析的相近。??

? 3.切換主庫成功后，輸出切換報告，同時在/data/mha中生成 mainBusiness.failover.complete文件。接著在新的主庫上進行虛擬IP的掛載，發送故障報告郵件。

附：

? 兩篇前言文章：
【MySQL】【高可用】purge_relay_logs工具的使用
【MySQL】【高可用】從masterha_master_switch工具簡單分析MHA的切換邏輯

? 1.千萬要注意定時清理relay log。我在搭建完之后，直接進行了壓測數據的寫入，大量relay log用盡了所有的硬盤空間。這時從庫MySQL服務假死，mha所有的腳本也都會因為得不到從庫的回應也同樣卡住。

? 2.另一種簡單的send_report的腳本：

vim /etc/mha/mha_error.sh
#!/bin/sh
SYSTEM=$1
echo $1 'mha error,please check it immediately!'|mail -s 'mha error' psyduck007@outlook.com

? 郵件系統安裝腳本：

printf "安裝mail相關軟件和服務"
yum -y install sendmail* > /dev/null 2>&1
yum -y install mailx > /dev/null 2>&1
printf "\033[32;1m%20s\033[0m\n" "[ OK ]"

printf "創建郵件發送配置"
cat > /etc/mail.rc<<EOF
set from=zabbix@xxx.com
set smtp=smtp.xxxx.com
set smtp-auth-user=zabbix@xxx.com
set smtp-auth-password=123456
set smtp-auth=login
EOF
printf "\033[32;1m%20s\033[0m\n" "[ OK ]"

printf "設置郵件服務自啟動"
systemctl enable sendmail > /dev/null 2>&1
printf "\033[32;1m%20s\033[0m\n" "[ OK ]"

printf "啟動郵件服務"
systemctl restart sendmail > /dev/null 2>&1
printf "\033[32;1m%20s\033[0m\n" "[ OK ]"

printf "發送測試郵件"
hostname |mail -s "test" psyduck007@outlook.com
printf "\033[32;1m%20s\033[0m\n" "[ OK ]"

? 調用方式：

/etc/mha/mah_error.sh mainBusiness