Linux中計算特定CPU使用率的方法

這篇文章主要介紹了Linux中計算特定CPU使用率的方法，具有一定借鑒價值，需要的朋友可以參考下。希望大家閱讀完這篇文章后大有收獲。下面讓小編帶著大家一起了解一下。

Linux中計算特定CPU使用率的方法：首先從【/proc/stat】中獲取 t1時刻系統總體的值；然后從【/proc/stat】中獲取t2時刻系統總的值；最后計算t2與t1之間系統總的CPU使用情況。

Linux中計算特定CPU使用率的方法：

1. 背景知識

在/proc/stat中可以查看每一個CPU的使用情況的，如下圖：

其中cpu(0/1/2/…)后面的那十個數字含義如下：

/proc/stat
kernel/system statistics.  Varies with architecture.  
Common entries include:
     user nice system idle iowait  irq  softirq steal guest guest_nice
cpu  4705 356  584    3699   23    23     0       0     0        0
cpu0 1393280 32966 572056 13343292 6130 0 17875 0 23933 0
   The amount of time, measured in units of USER_HZ
   (1/100ths of a second on most architectures, use
   sysconf(_SC_CLK_TCK) to obtain the right value), that
   the system ("cpu" line) or the specific CPU ("cpuN"
   line) spent in various states:
   user   (1) Time spent in user mode.
   nice   (2) Time spent in user mode with low priority
          (nice).
   system (3) Time spent in system mode.
   idle   (4) Time spent in the idle task.  This value
          should be USER_HZ times the second entry in the
          /proc/uptime pseudo-file.
   iowait (since Linux 2.5.41)
          (5) Time waiting for I/O to complete.  This
          value is not reliable, for the following rea‐
          sons:
          1. The CPU will not wait for I/O to complete;
             iowait is the time that a task is waiting for
             I/O to complete.  When a CPU goes into idle
             state for outstanding task I/O, another task
             will be scheduled on this CPU.
          2. On a multi-core CPU, the task waiting for I/O
             to complete is not running on any CPU, so the
             iowait of each CPU is difficult to calculate.
          3. The value in this field may decrease in cer‐
             tain conditions.
   irq (since Linux 2.6.0-test4)
          (6) Time servicing interrupts.
   softirq (since Linux 2.6.0-test4)
          (7) Time servicing softirqs.
   steal (since Linux 2.6.11)
          (8) Stolen time, which is the time spent in
          other operating systems when running in a virtu‐
          alized environment
   guest (since Linux 2.6.24)
          (9) Time spent running a virtual CPU for guest
          operating systems under the control of the Linux
          kernel.
   guest_nice (since Linux 2.6.33)
          (10) Time spent running a niced guest (virtual
          CPU for guest operating systems under the con‐
          trol of the Linux kernel).

2.計算具體CPU使用率

有了上面的背景知識，接下來我們就可以計算具體CPU的使用情況了。具體計算方式如下：

Total CPU time since boot = user+nice+system+idle+iowait+irq+softirq+steal
Total CPU Idle time since boot = idle + iowait
Total CPU usage time since boot = Total CPU time since boot - Total CPU Idle time since boot
Total CPU percentage = Total CPU usage time since boot/Total CPU time since boot * 100%

有了上面的計算公式，計算某一CPU使用率或者系統總的CPU占用率也就是不難了。

示例：計算系統整體CPU占用情況

首先從/proc/stat中獲取 t1時刻系統總體的user、nice、system、idle、iowait、irq、softirq、steal、guest、guest_nice的值，得到此時Total CPU time since boot（記為total1）和 Total CPU idle time since boot(記為idle1)。

其次，從/proc/stat中獲取t2時刻系統總的Total CPU time since boot（記為total2）和Total CPU idle time since boot（記為idle2）。（方法同上一步）

最后，計算t2與t1之間系統總的CPU使用情況。也就是：

CPU percentage between t1 and t2 = (（total2-total1）-（idle2-idle1））/（total2-total1）* 100%

其中， (（total2-total1）-（idle2-idle1））實際上就是t1與t2時刻之間系統CPU被占用的時間（總時間 - 空閑時間）。

下面是一段計算時間段內CPU被占用情況的腳本：

#!/bin/bash
# by Paul Colby (http://colby.id.au), no rights reserved ;)
PREV_TOTAL=0
PREV_IDLE=0
while true; do
  # Get the total CPU statistics, discarding the 'cpu ' prefix.
  CPU=(`sed -n 's/^cpu\s//p' /proc/stat`)
  IDLE=${CPU[3]} # Just the idle CPU time.
  # Calculate the total CPU time.
  TOTAL=0
  for VALUE in "${CPU[@]}"; do
    let "TOTAL=$TOTAL+$VALUE"
  done
  # Calculate the CPU usage since we last checked.
  let "DIFF_IDLE=$IDLE-$PREV_IDLE"
  let "DIFF_TOTAL=$TOTAL-$PREV_TOTAL"
  let "DIFF_USAGE=(1000*($DIFF_TOTAL-$DIFF_IDLE)/$DIFF_TOTAL+5)/10"
  echo -en "\rCPU: $DIFF_USAGE%  \b\b"
  # Remember the total and idle CPU times for the next check.
  PREV_TOTAL="$TOTAL"
  PREV_IDLE="$IDLE"
  # Wait before checking again.
  sleep 1
done

感謝你能夠認真閱讀完這篇文章，希望小編分享Linux中計算特定CPU使用率的方法內容對大家有幫助，同時也希望大家多多支持億速云，關注億速云行業資訊頻道，遇到問題就找億速云，詳細的解決方法等著你來學習!