溫馨提示×
您好，登錄后才能下訂單哦！
點擊 登錄注冊 即表示同意《億速云用戶服務條款》
您好，登錄后才能下訂單哦！
To allow NFS manipulate properly the file permissions of users that participate in more than 16 Groups, RPCSEC_GSS and Kerberos need to be used instead the default authentication method (AUTH_SYS). To configure Kerberos and NFSv4, the following article could be used :
Environment used in this procedure :
Important points :
Packages needed :
On client machine, make it sure that following packages are installed :
On server machine, make it sure that following package is installed :
Configuring Kerberos service on the Server :
1.1 There are a number of files that have to be manually edited on the server :
Edit /etc/krb5.conf
The stock version of this file will have EXAMPLE.COM or example.com everywhere you want to put your own realm or domain name. The two sections in question are libdefaults and domain_realm. The other sections do not need to be changed. In libdefaults, enter your own Kerberos realm name. You may want to set the clock skew to a lower value (provided you are synchronizing time with ntp). The file will look like :
[root@server ~]# cat /etc/krb5.conf
[logging]
default = FILE:/var/log/krb5libs.log
kdc = FILE:/var/log/krb5kdc.log
admin_server = FILE:/var/log/kadmind.log
[libdefaults]
default_realm = EXAMPLE.COM
dns_lookup_realm = false
dns_lookup_kdc = false
ticket_lifetime = 24h
forwardable = yes
[realms]
EXAMPLE.COM = {
kdc = server.example.com:88
admin_server = server.example.com:749
default_domain = example.com
}
[domain_realm]
.example.com = EXAMPLE.COM
example.com = EXAMPLE.COM
[appdefaults]
pam = {
debug = false
ticket_lifetime = 36000
renew_lifetime = 36000
forwardable = true
krb4_convert = false
}
1.2 Edit /var/kerberos/krb5kdc/kdc.conf
In this file, only the realms section needs to be modified. It is important to change the key types as well. I can confirm that the setting below work perfectly in our environment. You may want to decide on appropriate values for the maximum life of each ticket, and for how long each ticket can be renewed. Reasonable values are 1 day and 1 week but your needs will vary. The values here are the absolute maximum that the KDC will issue. Each principal has its own maximum as well. File will look like :
[root@server ~]# cat /var/kerberos/krb5kdc/kdc.conf
[kdcdefaults]
v4_mode = nopreauth
kdc_tcp_ports = 88
[realms]
EXAMPLE.COM = {
#master_key_type = des3-hmac-sha1
acl_file = /var/kerberos/krb5kdc/kadm5.acl
dict_file = /usr/share/dict/words
admin_keytab = /var/kerberos/krb5kdc/kadm5.keytab
supported_enctypes = aes256-cts:normal aes128-cts:normal des3-hmac-sha1:normal arcfour-hmac:normal des-hmac-sha1:normal des-cbc-md5:normal des-cbc-crc:normal des-cbc-crc:v4 des-cbc-crc:afs3
}
1.3 Edit /var/kerberos/krb5kdc/kadm5.acl :
This file determines who can modify the Kerberos database. You need to change the realm. File will look like :
[root@server ~]# cat /var/kerberos/krb5kdc/kadm5.acl */admin@EXAMPLE.COM *
1.4 Make sure /etc/gssapi_mech.conf looks like :
[root@server ~]# cat /etc/gssapi_mech.conf # library initialization function # ================================ ========================== # The MIT K5 gssapi library, use special function for initialization. libgssapi_krb5.so.2 mechglue_internal_krb5_init #
1.5 Create the Kerberos database :
Execute the following command :
[root@server ~]# kdb5_util -r EXAMPLE.COM create -s
This will prompt you for a password. You will only have to enter this password when you initially configure a slave KDC, so choose something large and random and store it in a secure place. Really, you may only have to enter this once more, so make it secure.
1.6 Add the first Administrative User :
I do administration as root, so the first user I add is root/admin. The default realm is appended automatically, so the command to use is as follows :
[root@server ~]# kadmin.local -q "addprinc root/admin"
Enter a password when prompted. You will need this password every time you administer the database.
1.7 At this point it is necessary to enable and start the kerberos services :
[root@server ~]# chkconfig kadmin on [root@server ~]# service kadmin start [root@server ~]# chkconfig krb5kdc on [root@server ~]# service krb5kdc start
To test if everything is working, execute "kadmin" or "kadmin.local". By default, the current user appended with ‘/admin’ is used as the principle.
[root@server ~]# kadmin Authenticating as principal root/admin@EXAMPLE.COM with password. Password for root/admin@EXAMPLE.COM: //Please enter admin password kadmin: listprincs K/M@EXAMPLE.COM host/server.example.com@EXAMPLE.COM host/client.example.com@EXAMPLE.COM kadmin/admin@EXAMPLE.COM kadmin/changepw@EXAMPLE.COM kadmin/history@EXAMPLE.COM kadmin/server.example.com@EXAMPLE.COM kmaiti@EXAMPLE.COM krbtgt/EXAMPLE.COM@EXAMPLE.COM nc@EXAMPLE.COM nfs/server.example.com@EXAMPLE.COM nfs/client.example.com@EXAMPLE.COM root/admin@EXAMPLE.COM kadmin:
The additional principles have been created by the tool. They are required so leave them be.
1.8 Create a Host Principal for the KDC :
Now you will want to create a nfs service principal for nfs server. You also need to add this principal to the local key table.
[root@server ~]# kadmin Authenticating as principal root/admin@EXAMPLE.COM with password. Password for root/admin@EXAMPLE.COM: kadmin: addprinc -randkey nfs/server.example.com //Execute this command. Don't forget to replace the hostname. kadmin: ktadd nfs/server.example.com // Adding key to keytab file.
1.9 Creating Kerberos Principals for client :
Run kadmin on the server and create the following principals. Replace client.example.com with the fully qualified name of the client machine.
[root@server ~]# kadmin Authenticating as principal root/admin@EXAMPLE.COM with password. Password for root/admin@EXAMPLE.COM: kadmin: addprinc -randkey nfs/client.example.com
1.10 Generate key in the keytab file for the admin and this will be saved in /var/kerberos/krb5kdc/kadm5.keytab since this has been mentioned in /var/kerberos/krb5kdc/kdc.conf. Use following commands :
[root@server ~]# kadmin Authenticating as principal root/admin@EXAMPLE.COM with password. Password for root/admin@EXAMPLE.COM: kadmin: ktadd -k /var/kerberos/krb5kdc/kadm5.keytab kadmin/admin //Execute these commands kadmin: ktadd -k /var/kerberos/krb5kdc/kadm5.keytab kadmin/changepw
1.11 Make it sure that ports 88 and 749 has opened at the firewall. Restart the firewall, kadmin and krb5kdc services.
Client Setup :
2.1 Copy the file /etc/krb5.conf from server (Kerberos server) to client machine.
2.2 Make it sure that ports 88 and 749 has opened at the firewall. Restart the firewall.
2.3 Create Kerberos Principals:
Execute "kadmin" command on the client console. Add the principal to the keytab file as follows for NFS :
[root@client ~]# kadmin Authenticating as principal root/admin@EXAMPLE.COM with password. Password for root/admin@EXAMPLE.COM: kadmin: ktadd -e des-cbc-crc:normal nfs/client.example.com
Configuring kerberos for NFSv4 (Assuming that NFSv4 has been installed on the server), on the kerberos (i.e NFSv4) server :
3.1 Create the necessary entries in /etc/exports. First, create an NFSv4 mount point. I would suggest /export. Next bind the real path to the NFSv4 mount point. In this example, we want to export the /data directory. We create /export/data for NFSv4 and mount /data there.
[root@server /]# mkdir -m 1777 /export [root@server /]# mkdir /export/data [root@server /]# mount -n --bind /data /export/data
3.2 Add the following lines in the /etc/exports file :
/export gss/krb5(sync,rw,fsid=0,insecure,no_subtree_check,anonuid=65534,anongid=65534) /export/data gss/krb5(sync,rw,nohide,insecure,no_subtree_check,anonuid=65534,anongid=65534)
3.3 Modify /etc/idmapd.conf and it'll look like :
[root@server /]# cat /etc/idmapd.conf [General] Verbosity = 0 Pipefs-Directory = /var/lib/nfs/rpc_pipefs Domain = example.com [Mapping] Nobody-User = nfsnobody Nobody-Group = nfsnobody [Translation] Method = nsswitch
3.4 Make the value of SECURE_NFS to yes in /etc/sysconfig/nfs. To enable secure NFS, you must add the following line to /etc/sysconfig/nfs :
SECURE_NFS=yes
After the restart the NFS servers, the environment is able to work properly using Kerberos authentication and RPCSEC_GSS.
Testing :
On client machine issue the following command to mount the exporting directory of the server :
# mount -t nfs4 -o sec=krb5 server.example.com:/ /mnt/my_nfs_mount_point
Now create the files inside the /data directory on the server and view the files inside /mnt directory on the client machine.
Note : NFS daemons looks like on the server :
[root@server /]# service nfs status rpc.svcgssd (pid 8974) is running... rpc.mountd (pid 8994) is running... nfsd (pid 8991 8990 8989 8988 8987 8986 8985 8984) is running... rpc.rquotad (pid 8979) is running...
By default NFS clients and servers use the AUTH_SYS protocol to authenticate users.
AUTH_SYS is defined in RPC v2 (http://www.ietf.org/rfc/rfc1831.txt) to allocate a 4 bit value to group memberships, hence the 16 groups limitation.
But since v4, NFS can use a different authentication protocol such as RPCSEC_GSS which supports more groups.
The following considerations can help to debug problems with the above setup.
免責聲明：本站發布的內容（圖片、視頻和文字）以原創、轉載和分享為主，文章觀點不代表本網站立場，如果涉及侵權請聯系站長郵箱：is@yisu.com進行舉報，并提供相關證據，一經查實，將立刻刪除涉嫌侵權內容。
