溫馨提示×
您好，登錄后才能下訂單哦！
點擊 登錄注冊 即表示同意《億速云用戶服務條款》
您好，登錄后才能下訂單哦！
下面我們進行更復雜情況的處理，就是非一致性關閉的情況下日志損壞的情況。這種情況是很有實際意義的。因為在出現錯誤的時候，Oracle可能不會允許一致性關閉。沒有經驗的處理人員往往會貿然的強制關閉，我們獲得到的場景往往也是非一致的情況。
4、非一致性關閉非當前日志組處理——Inactive日志組
非一致性關閉情況下，online日志組全員損壞是很復雜的，也是潛在會有數據損失的。我們這里說的非一致性關閉，就是shutdown abort或者強制斷電之后。由于Oracle數據庫采用寫日志在先的策略，關閉點上我們不能保證臟塊（Dirty Block）全都被寫入到數據文件，各個數據文件和控制文件在SCN時間上保證一致性。
但是當數據庫重新啟動時，在open階段，Oracle會進行instance recovery，從最后一個增量檢查點check point追起，重演事務并且回滾事務。Instance Recovery過程也被稱為前滾回滾過程，或者成為Cache Recovery和Transaction Recovery過程。
如果進行不一致關閉就會需要進行instance recovery，進行instance recovery最需要的內容就是online redo log。如果我們刪除online redo log group恰好是進行instance recovery所需要的，那么我們就只能犧牲掉一部分數據，進行不完全恢復。
我們刪除的非當前日志組也有很大風險，因為在日志切換成非當前日志之后，日志組有一段時間對應臟塊是不能寫入到數據文件中的。這也就是日志文件的active狀態。本節討論非當前日志成員被刪除的情況，具體劃分為Inactive日志組和非Inactive日志組。
我們下面實驗選擇Oracle 11g的Linux版本進行。
SQL> select * from v$version;
BANNER
--------------------------------------------------------------------------------
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
當前日志情況如下：
SQL> select group#, status, archived, sequence# from v$log;
GROUP# STATUS ARCHIVED SEQUENCE#
---------- ---------------- -------- ----------
1 INACTIVE YES 108
2 CURRENT NO 110
3 INACTIVE YES 109
SQL> drop table t;
Table dropped
SQL> create table t as select * from dba_objects;
Table created
SQL> select group#, status, member from v$logfile;
GROUP# STATUS MEMBER
---------- ------- --------------------------------------------------------------------------------
3 /u01/oradata/WILSON/onlinelog/o1_mf_3_7xt456o0_.log
3 /u01/flash_recovery_area/WILSON/onlinelog/o1_mf_3_7xt45bvp_.log
2 /u01/oradata/WILSON/onlinelog/o1_mf_2_7xt44w3k_.log
2 /u01/flash_recovery_area/WILSON/onlinelog/o1_mf_2_7xt450rv_.log
1 /u01/oradata/WILSON/onlinelog/o1_mf_1_870jlj6v_.log
1 /u01/flash_recovery_area/WILSON/onlinelog/o1_mf_1_870jljvk_.log
6 rows selected
強制停機之后，刪除日志組1對象。
[oracle@bspdev ~]$ sqlplus /nolog
SQL*Plus: Release 11.2.0.1.0 Production on Sat Oct 6 22:27:57 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
SQL> conn / as sysdba
Connected.
SQL> shutdown abort
ORACLE instance shut down.
[oracle@bspdev ~]$ mv /u01/oradata/WILSON/onlinelog/o1_mf_1_870jlj6v_.log /u01/oradata/WILSON/onlinelog/redogroup1.log
[oracle@bspdev ~]$ rm /u01/flash_recovery_area/WILSON/onlinelog/o1_mf_1_870jljvk_.log
[oracle@bspdev ~]$
重新啟動之后，無法找到對應的日志文件，直接報錯。
SQL> conn / as sysdba
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 849530880 bytes
Fixed Size 1339824 bytes
Variable Size 562040400 bytes
Database Buffers 281018368 bytes
Redo Buffers 5132288 bytes
Database mounted.
ORA-03113: end-of-file on communication channel
Process ID: 5059
Session ID: 1 Serial number: 5
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Errors in file /u01/diag/rdbms/wilson/wilson/trace/wilson_ora_5059.trc:
ORA-00313: open failed for members of log group 1 of thread
ORA-00312: online log 1 thread 1: '/u01/oradata/WILSON/onlinelog/o1_mf_1_870jlj6v_.log'
ORA-00312: online log 1 thread 1: '/u01/flash_recovery_area/WILSON/onlinelog/o1_mf_1_870jljvk_.log'
USER (ospid: 5059): terminating the instance due to error 313
Instance terminated by USER, pid = 5059
重新啟動到mount狀態，進行處理。
SQL> conn / as sysdba
Connected to an idle instance.
SQL> startup mount
ORACLE instance started.
Total System Global Area 849530880 bytes
Fixed Size 1339824 bytes
Variable Size 562040400 bytes
Database Buffers 281018368 bytes
Redo Buffers 5132288 bytes
Database mounted.
SQL> select open_mode from v$database;
OPEN_MODE
--------------------
MOUNTED
SQL> select group#, status, archived, sequence# from v$log;
GROUP# STATUS ARC SEQUENCE#
---------- ---------------- --- ----------
1 INACTIVE YES 108
3 INACTIVE YES 109
2 CURRENT NO 110
SQL> select checkpoint_change#, last_change# from v$datafile;
CHECKPOINT_CHANGE# LAST_CHANGE#
------------------ ------------
1950243 1950243
1950243 1950243
1950243 1950243
1950243 1950243
1950243 1950243
1950243 1950243
1950243 1950243
7 rows selected.
SQL> select checkpoint_change# from v$datafile_header;
CHECKPOINT_CHANGE#
------------------
1950243
1950243
1950243
1950243
1950243
1950243
1950243
7 rows selected.
SQL>
雖然啟動失效，但是我們沒有看到很嚴重的一致性問題。我們嘗試啟動數據庫。
SQL> alter database clear logfile group 1;
Database altered.
SQL> alter database open;
Database altered.
SQL> select group#, status, archived, sequence# from v$log;
GROUP# STATUS ARCHIVED SEQUENCE#
---------- ---------------- -------- ----------
1 CURRENT NO 111
2 INACTIVE YES 110
3 INACTIVE YES 109
這種場景是比較好處理的。下面我們討論如果是Active狀態的日志被刪除如何？
5、非一致性關閉非當前日志組處理——Active日志組
我們構造出Active日志組對象。
SQL> select group#, status, member from v$logfile;
GROUP# STATUS MEMBER
---------- ------- --------------------------------------------------------------------------------
3 /u01/oradata/WILSON/onlinelog/o1_mf_3_7xt456o0_.log
3 /u01/flash_recovery_area/WILSON/onlinelog/o1_mf_3_7xt45bvp_.log
2 /u01/oradata/WILSON/onlinelog/o1_mf_2_7xt44w3k_.log
2 /u01/flash_recovery_area/WILSON/onlinelog/o1_mf_2_7xt450rv_.log
1 /u01/oradata/WILSON/onlinelog/o1_mf_1_870kg322_.log
1 /u01/flash_recovery_area/WILSON/onlinelog/o1_mf_1_870kg3mr_.log
6 rows selected
SQL> alter system switch logfile;
System altered
SQL> alter system switch logfile;
System altered
SQL> select group#, status, archived, sequence# from v$log;
GROUP# STATUS ARCHIVED SEQUENCE#
---------- ---------------- -------- ----------
1 CURRENT NO 114
2 ACTIVE YES 113
3 INACTIVE YES 112
之后強制關閉數據庫，刪除對應的日志組2。
SQL> shutdown abort;
ORACLE instance shut down.
SQL>
[oracle@bspdev trace]$ mv /u01/oradata/WILSON/onlinelog/o1_mf_2_7xt44w3k_.log /u01/oradata/WILSON/onlinelog/redogroup2.log
[oracle@bspdev trace]$ rm /u01/flash_recovery_area/WILSON/onlinelog/o1_mf_2_7xt450rv_.log
重新啟動數據庫。
SQL> conn / as sysdba
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 849530880 bytes
Fixed Size 1339824 bytes
Variable Size 562040400 bytes
Database Buffers 281018368 bytes
Redo Buffers 5132288 bytes
Database mounted.
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1:
'/u01/flash_recovery_area/WILSON/onlinelog/o1_mf_2_7xt450rv_.log'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
ORA-00312: online log 2 thread 1:
'/u01/oradata/WILSON/onlinelog/o1_mf_2_7xt44w3k_.log'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
SQL> select open_mode from v$database;
OPEN_MODE
--------------------
MOUNTED
檢查文件狀態情況。
SQL> select checkpoint_change#, last_change# from v$datafile;
CHECKPOINT_CHANGE# LAST_CHANGE#
------------------ ------------
1970578
1970578
1970578
1970578
1970578
1970578
1970578
7 rows selected.
SQL> select checkpoint_change# from v$datafile_header;
CHECKPOINT_CHANGE#
------------------
1970578
1970578
1970578
1970578
1970578
1970578
1970578
7 rows selected.
從v$datafile的情況，我們就可以看出關閉是不完全關閉情況。我們只能嘗試進行恢復。
SQL> recover database;
ORA-00279: change 1970578 generated at 10/06/2012 22:59:02 needed for thread 1
ORA-00289: suggestion :
/u01/flash_recovery_area/WILSON/archivelog/2012_10_06/o1_mf_1_113_870kwzkl_.arc
ORA-00280: change 1970578 for thread 1 is in sequence #113
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
cancel
Media recovery cancelled.
提出恢復使用sequence#=113的日志，但是這個恰恰是被刪除的對象。所以，只能退而求其次選擇使用不完全恢復。
SQL> recover database until cancel;
ORA-00279: change 1970578 generated at 10/06/2012 22:59:02 needed for thread 1
ORA-00289: suggestion :
/u01/flash_recovery_area/WILSON/archivelog/2012_10_06/o1_mf_1_113_870kwzkl_.arc
ORA-00280: change 1970578 for thread 1 is in sequence #113
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
auto
ORA-00279: change 1970779 generated at 10/06/2012 23:00:47 needed for thread 1
ORA-00289: suggestion :
/u01/flash_recovery_area/WILSON/archivelog/2012_10_06/o1_mf_1_114_%u_.arc
ORA-00280: change 1970779 for thread 1 is in sequence #114
ORA-00278: log file
'/u01/flash_recovery_area/WILSON/archivelog/2012_10_06/o1_mf_1_113_870kwzkl_.arc
' no longer needed for this recovery
ORA-00308: cannot open archived log
'/u01/flash_recovery_area/WILSON/archivelog/2012_10_06/o1_mf_1_114_%u_.arc'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1:
'/u01/oradata/WILSON/datafile/o1_mf_system_7xt3yzhj_.dbf'
SQL> alter database open resetlogs;
alter database open resetlogs
*
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1:
'/u01/oradata/WILSON/datafile/o1_mf_system_7xt3yzhj_.dbf'
嘗試使用RMAN SCN方式打開。
SQL> select group#, sequence#, first_change# from v$log;
GROUP# SEQUENCE# FIRST_CHANGE#
---------- ---------- -------------
1 114 1970779
3 112 1950574
2 113 1970577
RMAN> recover database until sequence 112;
Starting recover at 06-OCT-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=18 device type=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 10/06/2012 23:19:42
RMAN-06556: datafile 1 must be restored from backup older than SCN 1950574
System文件的日期已經超過了recover范疇。只能嘗試利用RMAN備份進行還原。
RMAN> restore database;
Starting restore at 06-OCT-12
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backup set restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_DISK_1: restoring datafile 00001 to /u01/oradata/WILSON/datafile/o1_mf_system_7xt3yzhj_.dbf
channel ORA_DISK_1: restoring datafile 00002 to /u01/oradata/WILSON/datafile/o1_mf_sysaux_7xt3yzkb_.dbf
channel ORA_DISK_1: restoring datafile 00003 to /u01/oradata/WILSON/datafile/o1_mf_undotbs1_7xt3yzl5_.dbf
channel ORA_DISK_1: restoring datafile 00004 to /u01/oradata/WILSON/datafile/o1_mf_users_805nxydh_.dbf
channel ORA_DISK_1: restoring datafile 00005 to /u01/oradata/WILSON/datafile/o1_mf_example_7xt46m9x_.dbf
channel ORA_DISK_1: restoring datafile 00006 to /u01/oradata/WILSON/datafile/o1_mf_nbscommo_820frtg1_.dbf
channel ORA_DISK_1: restoring datafile 00007 to /u01/oradata/WILSON/datafile/o1_mf_nbscommo_820ft5y5_.dbf
channel ORA_DISK_1: reading from backup piece /u01/flash_recovery_area/WILSON/backupset/2012_10_06/o1_mf_nnndf_TAG20121006T220912_870gwjoy_.bkp
channel ORA_DISK_1: piece handle=/u01/flash_recovery_area/WILSON/backupset/2012_10_06/o1_mf_nnndf_TAG20121006T220912_870gwjoy_.bkp tag=TAG20121006T220912
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:02:46
Finished restore at 06-OCT-12
--進行部分恢復
RMAN> recover database until sequence 112;
Starting recover at 06-OCT-12
using channel ORA_DISK_1
starting media recovery
archived log for thread 1 with sequence 106 is already on disk as file /u01/flash_recovery_area/WILSON/archivelog/2012_10_06/o1_mf_1_106_870gzbfg_.arc
archived log for thread 1 with sequence 107 is already on disk as file /u01/flash_recovery_area/WILSON/archivelog/2012_10_06/o1_mf_1_107_870jlysq_.arc
archived log for thread 1 with sequence 108 is already on disk as file /u01/flash_recovery_area/WILSON/archivelog/2012_10_06/o1_mf_1_108_870jo98m_.arc
archived log for thread 1 with sequence 109 is already on disk as file /u01/flash_recovery_area/WILSON/archivelog/2012_10_06/o1_mf_1_109_870jx2gj_.arc
archived log for thread 1 with sequence 110 is already on disk as file /u01/flash_recovery_area/WILSON/archivelog/2012_10_06/o1_mf_1_110_870kgmdp_.arc
archived log for thread 1 with sequence 111 is already on disk as file /u01/flash_recovery_area/WILSON/archivelog/2012_10_06/o1_mf_1_111_870knhwb_.arc
archived log file name=/u01/flash_recovery_area/WILSON/archivelog/2012_10_06/o1_mf_1_106_870gzbfg_.arc thread=1 sequence=106
archived log file name=/u01/flash_recovery_area/WILSON/archivelog/2012_10_06/o1_mf_1_107_870jlysq_.arc thread=1 sequence=107
archived log file name=/u01/flash_recovery_area/WILSON/archivelog/2012_10_06/o1_mf_1_108_870jo98m_.arc thread=1 sequence=108
archived log file name=/u01/flash_recovery_area/WILSON/archivelog/2012_10_06/o1_mf_1_109_870jx2gj_.arc thread=1 sequence=109
archived log file name=/u01/flash_recovery_area/WILSON/archivelog/2012_10_06/o1_mf_1_110_870kgmdp_.arc thread=1 sequence=110
archived log file name=/u01/flash_recovery_area/WILSON/archivelog/2012_10_06/o1_mf_1_111_870knhwb_.arc thread=1 sequence=111
media recovery complete, elapsed time: 00:00:20
Finished recover at 06-OCT-12
明顯，得益于歸檔模式和備份集合。我們似乎成功的完成了recover過程。下面我們嘗試開啟數據庫，注意這里已經是incomplete恢復了，我們必須承擔這部分的數據損失。
SQL> conn / as sysdba
Connected.
SQL> alter database open resetlogs;
Database altered.
SQL> select group#, status, member from v$logfile;
GROUP# STATUS MEMBER
---------- ------- --------------------------------------------------------------------------------
3 /u01/oradata/WILSON/onlinelog/o1_mf_3_870n4lsg_.log
3 /u01/flash_recovery_area/WILSON/onlinelog/o1_mf_3_870n4o31_.log
2 /u01/oradata/WILSON/onlinelog/o1_mf_2_870n48hc_.log
2 /u01/flash_recovery_area/WILSON/onlinelog/o1_mf_2_870n4dtl_.log
1 /u01/oradata/WILSON/onlinelog/o1_mf_1_870n42n1_.log
1 /u01/flash_recovery_area/WILSON/onlinelog/o1_mf_1_870n44z3_.log
6 rows selected
SQL> select group#, status, archived, sequence# from v$log;
GROUP# STATUS ARCHIVED SEQUENCE#
---------- ---------------- -------- ----------
1 CURRENT NO 1
2 UNUSED YES 0
3 UNUSED YES 0
總結：當我們incomplete關閉數據庫，又刪除了Active狀態日志組成員之后，我們必須要承擔對應的數據損失，一部分數據可能因此丟失。筆者之后的處理，是借助之前rman的一個備份集合，進行非完全恢復到最后一個可以找到的日志文件組。這里，我們再次強調歸檔模式和備份的重要性。
如果我們刪除的是一個當前的日志成員，在非完全關閉的情況下，事情也是很復雜的處理。在下一節中，我們選擇另外一種方法進行處理。
免責聲明：本站發布的內容（圖片、視頻和文字）以原創、轉載和分享為主，文章觀點不代表本網站立場，如果涉及侵權請聯系站長郵箱：is@yisu.com進行舉報，并提供相關證據，一經查實，將立刻刪除涉嫌侵權內容。
