greenplum監控軟件Greenplum-cc-web如何安裝

這篇文章主要介紹了greenplum監控軟件Greenplum-cc-web如何安裝，具有一定借鑒價值，感興趣的朋友可以參考下，希望大家閱讀完這篇文章之后大有收獲，下面讓小編帶著大家一起了解一下

 3 開始安裝

1. 以下是我的設置，可以根據自己的實際情況設置：

2. [gpadmin@mdw ~]$ gpcmdr --setup
   

3.  
   

4. An instance name is used by the Greenplum Command Center as
   

5. a way to uniquely identify a Greenplum Database that has the monitoring
   

6. components installed and configured. This name is also used to control
   

7. specific instances of the Greenplum Command Center web UI. Instance names
   

8. can contain letters, digits and underscores and are not case sensitive.
   

9.  
   

10. Please enter a new instance name:
    

11. > gpmon
    

12. The web component of the Greenplum Command Center can connect to a
    

13. monitor database on a remote Greenplum Database.
    

14.  
    

15.  
    

16. Is the master host for the Greenplum Database remote? Yy|Nn (default=N):
    

17. > n
    

18. The display name is shown in the web interface and does not need to be
    

19. a hostname.
    

20.  
    

21.  
    

22. What would you like to use for the display name for this instance:
    

23. > linux1024
    

24. What port does the Greenplum Database use? (default=5432):
    

25. >
    

26. Creating instance schema in GPDB. Please wait ...
    

27. The display name is shown in the web interface and does not need to be
    

28. a hostname.
    

29.  
    

30.  
    

31.  
    

32. Would you like to install workload manager? Yy|Nn (default=N):
    

33. > n
    

34. Skipping installation of workload manager.
    

35. The Greenplum Command Center runs a small web server for the UI and web API.
    

36. This web server by default runs on port 28080, but you may specify any available port.
    

37.  
    

38. What port would you like the web server to use for this instance? (default=28080):
    

39. >
    

40. Users logging in to the Command Center must provide database user
    

41. credentials. In order to protect user names and passwords, it is recommended
    

42. that SSL be enabled.
    

43.  
    

44.  
    

45. Do you want to enable SSL for the Web API Yy|Nn (default=N):
    

46. >
    

47.  
    

48. Do you want to enable ipV6 for the Web API Yy|Nn (default=N):
    

49. >
    

50.  
    

51. Do you want to enable Cross Site Request Forgery Protection for the Web API Yy|Nn (default=N):
    

52. >
    

53.  
    

54. Do you want to copy the instance to a standby master host Yy|Nn (default=Y):
    

55. > n
    

56.  
    

57. Done writing lighttpd configuration to /usr/local/greenplum-cc-web/./instances/gpmon/conf/lighttpd.conf
    

58. Done writing web UI configuration to /usr/local/greenplum-cc-web/./instances/gpmon/conf/gpperfmonui.conf
    

59. Done writing web UI clustrs configuration to /usr/local/greenplum-cc-web/./instances/gpmon/conf/clusters.conf
    

60.  
    

61. Greenplum Command Center UI configuration is now complete. If
    

62. at a later date you want to change certain parameters, you can
    

63. either re-run 'gpcmdr --setup' or edit the configuration file
    

64. located at /usr/local/greenplum-cc-web/./instances/gpmon/conf/gpperfmonui.conf.
    

65.  
    

66. The web UI for this instance is available at http://mdw:28080/
    

67.  
    

68. You can now start the web UI for this instance by running: gpcmdr --start gpmon   安裝完后啟動！
    

69. No instances  
    

1. 期間你可能會遇到報錯：FATAL: no pg_hba.conf entry for host "::1"
   
   
   

1. 解決辦法：
   

2. 在pg_hba.conf中添加：    

3. host    all         all ::1/128       trust

2. 
   

感謝你能夠認真閱讀完這篇文章，希望小編分享的“greenplum監控軟件Greenplum-cc-web如何安裝”這篇文章對大家有幫助，同時也希望大家多多支持億速云，關注億速云行業資訊頻道，更多相關知識等著你來學習!